100% Pass Your 300-710 Exam Dumps at First Attempt with 2Pass4sure
Penetration testers simulate 300-710 exam PDF
Skills Measured by 300-710
To get the passing score in the official test, the candidates must address the following skills as described below:
- Configuration — under this exam category, examinees will have to tweak the system configurations of Cisco Firepower Management Center and set up policies such as SSL, intrusion, malware & file, access control, identity, DNS, and pre-filter necessary for the Cisco Firepower Management Center. What is more, applicants will have to be aware of how to use that Center to adjust numerous aspects such as correlation, network discovery, actions, application detectors & Open AppID, intrusion rules & objects, and tweak various devices including QoS, NAT, Platform Settings, VPN, Certificates, and Device Management.
- Deployment — for the initial part, students must be able to incorporate NGFW modes such as transparent & routed ones, deploy NGIPS such as Inline & Passive, incorporate high availability facilities like standby/active failover, link redundancy, and multi-instance, and finally, explain IRB settings.
- Management & Troubleshooting — here, candidates must show they have the ability to adjust dashboards & analytics in Firepower Management Center, troubleshoot problems with the help of GUI & FMC CLI, anticipate risks, create reports, and lastly, use packet capture methods to carry out troubleshooting.
- Integration — in the final domain, students must demonstrate their ability to deploy Threat Intelligence Director when investigating security intelligence feeds from third parties, use Firepower Management Center to tweak Cisco AMP for endpoints and networks, explain the Cisco Identify Services Engine (ISE) & the Cisco FMC PxGrid Integration, carry out security checks with the help of the Cisco Threat Response, and finally, detail the use of the Rapid Threat Containment (RTC) feature found inside FMC.
NEW QUESTION 46
An engineer is restoring a Cisco FTD configuration from a remote backup using the command restore remote-manager-backup location 1.1.1.1 admin /volume/home/admin BACKUP_Cisc394602314.zip on a Cisco FMG. After connecting to the repository, an error occurred that prevents the FTD device from accepting the backup file. What is the problem?
- A. The backup file is not in .cfg format.
- B. The backup file extension was changed from tar to zip
- C. The backup file was not enabled prior to being applied
- D. The backup file is too large for the Cisco FTD device
Answer: B
NEW QUESTION 47
In a Cisco AMP for Networks deployment, which disposition is returned if the cloud cannot be reached?
- A. clean
- B. unknown
- C. disconnected
- D. unavailable
Answer: D
NEW QUESTION 48
A network security engineer must export packet captures from the Cisco FMC web browser while troubleshooting an issue. When navigating to the address Error! Hyperlink reference not valid. IP>/capture/CAPI/pcap/test.pcap. an error 403: Forbidden is given instead of the PCAP file. Which action must the engineer take to resolve this issue?
- A. Use the Cisco FTD IP address as the proxy server setting on the browser.
- B. Disable the proxy setting on the browser.
- C. Enable the HTTPS server for the device platform policy.
- D. Disable the HTTPS server and use HTTP instead.
Answer: C
NEW QUESTION 49
An organization has a Cisco IPS running in inline mode and is inspecting traffic for malicious activity. When traffic is received by the Cisco IRS, if it is not dropped, how does the traffic get to its destination?
- A. The packets are duplicated and a copy is sent to the destination.
- B. It is transmitted out of the Cisco IPS outside interface.
- C. It is routed back to the Cisco ASA interfaces for transmission.
- D. It is retransmitted from the Cisco IPS inline set.
Answer: C
NEW QUESTION 50
Which Firepower feature allows users to configure bridges in routed mode and enables devices to perform Layer 2 switching between interfaces?
- A. FlexConfig
- B. BDI
- C. IRB
- D. SGT
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/relnotes/Firepower_System_Release_Notes_Version_620/new_features_and_functionality.html
NEW QUESTION 51
An engineer is troubleshooting a device that cannot connect to a web server. The connection is initiated from the Cisco FTD inside interface and attempting to reach 10.0.1.100 over the non-standard port of 9443 The host the engineer is attempting the connection from is at the IP address of 10.20.10.20. In order to determine what is happening to the packets on the network, the engineer decides to use the FTD packet capture tool Which capture configuration should be used to gather the information needed to troubleshoot this issue?
A)
B)
C)
D)
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION 52
Which Cisco Firepower feature is used to reduce the number of events received in a period of time?
- A. suspending
- B. thresholding
- C. rate-limiting
- D. correlation
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firesight/541/firepower-module-user-guide/asa-firepower-module-user-guide-v541/Intrusion-Global-Threshold.html
NEW QUESTION 53
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION 54
Which Firepower feature allows users to configure bridges in routed mode and enables devices to perform Layer 2 switching between interfaces?
- A. FlexConfig
- B. BDI
- C. IRB
- D. SGT
Answer: C
Explanation:
Section: Configuration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/relnotes/ Firepower_System_Release_Notes_Version_620/new_features_and_functionality.html
NEW QUESTION 55
Which two OSPF routing features are configured in Cisco FMC and propagated to Cisco FTD? (Choose two.)
- A. MD5 authentication to OSPF packets
- B. virtual links
- C. area boundary router type 1 LSA filtering
- D. OSPFv2 with IPv6 capabilities
- E. SHA authentication to OSPF packets
Answer: B,C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/ospf_for_firepower_threat_defense.html
NEW QUESTION 56
On the advanced tab under inline set properties, which allows interfaces to emulate a passive interface?
- A. strict TCP enforcement
- B. transparent inline mode
- C. propagate link state
- D. TAP mode
Answer: C
NEW QUESTION 57
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION 58
In which two ways do access control policies operate on a Cisco Firepower system? (Choose two.)
- A. File policies use an associated variable set to perform intrusion prevention.
- B. They can block traffic based on Security Intelligence data.
- C. Traffic inspection can be interrupted temporarily when configuration changes are deployed.
- D. The system performs intrusion inspection followed by file inspection.
- E. The system performs a preliminary inspection on trusted traffic to validate that it matches the trusted parameters.
Answer: B,C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Access
NEW QUESTION 59
Refer to the exhibit.
What must be done to fix access to this website while preventing the same communication to all other websites?
- A. Create an access control policy rule to allow port 443 to only 172.1.1 50
- B. Create an intrusion policy rule to have Snort allow port 443 to only 172.1.1.50
- C. Create an intrusion policy rule to have Snort allow port 80 to only 172.1.1 50.
- D. Create an access control policy rule to allow port 80 to only 172.1.1 50.
Answer: D
NEW QUESTION 60
What is the maximum bit size that Cisco FMC supports for HTTPS certificates?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config- guide-v61/system_configuration.html
NEW QUESTION 61
Which policy rule is included in the deployment of a local DMZ during the initial deployment of a Cisco NGFW through the Cisco FMC GUI?
- A. deny ip any
- B. permit ip any
- C. a default DMZ policy for which only a user can change the IP addresses.
- D. no policy rule is included
Answer: D
Explanation:
Section: Deployment
NEW QUESTION 62
What is a valid Cisco AMP file disposition?
- A. malware
- B. non-malicious
- C. known-good
- D. pristine
Answer: A
Explanation:
Section: Integration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Reference_a_wrapper_Chapter_topic_here.html
NEW QUESTION 63
......
All 300-710 Dumps and Training Courses: https://www.2pass4sure.com/CCNPSecurity/300-710-actual-exam-braindumps.html
Help candidates to study and pass the Securing Networks with Cisco Firepower Exams hassle-free: https://drive.google.com/open?id=1UcB290GCABNvvKULfqMpX-vCyBdI32lP