2023 Valid 200-301 Real Exam Questions (Updated) 100% Dumps & Practice Exam
[UPDATED 2023] Cisco 200-301 Questions Prepare with Free Demo of PDF
Cisco Certified Network Associate (CCNA) certification is one of the most popular networking certifications in the industry. It is designed for individuals who are looking to gain knowledge and skills in networking fundamentals, routing and switching technologies, and security concepts. Cisco Certified Network Associate Exam certification is highly valued by employers as it demonstrates a strong understanding of networking concepts and technologies.
Cisco 200-301 exam consists of 120 questions and has a time limit of 120 minutes. The questions range from multiple-choice, drag and drop, and simulations. 200-301 exam is conducted online and can be taken at any Pearson VUE testing center globally. Cisco Certified Network Associate Exam certification is highly recognized in the networking industry and is a prerequisite for many job roles in the field. Passing the Cisco 200-301 exam not only validates your knowledge and skills but also sets you apart from other networking professionals in the industry.
NEW QUESTION # 320
Drag the IPv6 DNS record types from the left onto the description on the right.
https://ns1.com/resources/dns-types-records-servers-and-queries#:~:text=Address%20Mapping%20record%20(A%20Record,a%20hostname%20to%20another%20hostname.
Answer:
Explanation:
NEW QUESTION # 321 
Answer:
Explanation:
NEW QUESTION # 322
Router A learns the same route from two different neighbors, one of the neighbor routers is an OSPF neighbor and the other is an EIGRP neighbor. What is the administrative distance of the route that will be installed in the routing table?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
The Administrative distance (AD) of EIGRP is 90 while the AD of OSPF is 110 so EIGRP route will be chosen to install into the routing table.
NEW QUESTION # 323
Refer to the exhibit.
An engineer configured NAT translations and has verified that the configuration is correct.
Which IP address is the source IP?
- A. 172.23.104.4
- B. 10.4.4.4
- C. 10.4.4.5
- D. 172.23.103.10
Answer: A
NEW QUESTION # 324
Refer to the exhibit.
A network engineer must block access for all computers on VLAN 20 to the web server via HTTP All other computers must be able to access the web server Which configuration when applied to switch A accomplishes this task?
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: D
NEW QUESTION # 325
An organization has decided to start using cloud-provided services.
Which cloud service allows the organization to install its own operating system on a virtual machine?
- A. network-as-a-service
- B. software-as-a-service
- C. infrastructure-as-a-service
- D. platform-as-a-service
Answer: C
NEW QUESTION # 326 
Refer to the exhibit. An engineer booted a new switch and applied this configuration via the console port. Which additional configuration must be applied to allow administrators to authenticate directly to enable privilege mode via Telnet using a local username and password?
- A.
- B.
- C.
- D.
Answer: D
Explanation:
Section: Security Fundamentals
NEW QUESTION # 327
Refer to the exhibit.
A network engineer must block access for all computers on VLAN 20 to the web server via HTTP All other computers must be able to access the web server Which configuration when applied to switch A accomplishes this task?
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: D
NEW QUESTION # 328
Drag and drop to the characteristics of networking from the left onto the correct networking types on the right.
Answer:
Explanation:
NEW QUESTION # 329
Refer to the exhibit.
An engineer configured the New York router with state routes that point to the Atlanta and Washington sites.
When command must be configured on the Atlanta and Washington routers so that both sites are able to reach the loopback2 interface on the New York router?
- A. ip route 0.0.0.0.0.0.0.0 Serial 0/0/0
- B. ipv6 route ::/0 Serial 0/0/1
- C. ipv6 route ::/0 2000::2
- D. ipv6 route 0/0 Serial 0/0/0
- E. ipv6 route ::/0 Serial 0/0/0
Answer: C
NEW QUESTION # 330
Refer to the Exhibit.
After the switch configuration the ping test fails between PC A and PC B Based on the output for switch 1.
which error must be corrected?
- A. The PCs are m the incorrect VLAN
- B. Access mode is configured on the switch ports.
- C. All VLANs are not enabled on the trunk
- D. There is a native VLAN mismatch
Answer: D
NEW QUESTION # 331
Refer to the exhibit.
Which route does R1 select for traffic that is destined to 192.168.16.2?
- A. 192.168.16.0/27
- B. 192.168.26.0/26
- C. 192.168.16.0/24
- D. 192.168.16.0/21
Answer: A
NEW QUESTION # 332
Refer to the exhibit.
Which route type is configured to reach the internet?
- A. default route
- B. network route
- C. host route
- D. floating static route
Answer: A
NEW QUESTION # 333
Which command enables a router to become a DHCP client?
- A. ip dhcp pool
- B. ip helper-address
- C. ip address dhcp
- D. ip dhcp client
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/12-4/dhcp-12-4-book/config-dhcp-client.html
If we want to get an IP address from the DHCP server on a Cisco device, we can use the command "ip address dhcp".
Note: The command "ip helper-address" enables a router to become a DHCP Relay Agent.
NEW QUESTION # 334
Drag and drop the facts about wireless architectures from the left onto the types of access point on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 335
Drag and drop the IPv6 addresses from the left onto the corresponding address types on the right.
Answer:
Explanation:
NEW QUESTION # 336
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN Controller is true?
- A. When enabled the WLC bandwidth drops to 500 Mbps
- B. The EtherChannel must be configured in "mode active"
- C. One functional physical port is needed to pass client traffic
- D. To pass client traffic two or more ports must be configured.
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-2/config-guide/b_cg82/b_cg82_chapter_010101011
NEW QUESTION # 337
Refer to the exhibit.
Wireless LAN access must be set up to force all clients from the NA WLAN to authenticate against the local database. The WLAN is configured for local EAP authentication. The time that users access the network must not be limited. Which action completes this configuration?
- A. Set the Lifetime (seconds) value to 0
- B. Uncheck the Guest User check box
- C. Check the Guest User Role check box
- D. Clear the Lifetime (seconds) value
Answer: A
NEW QUESTION # 338
Drag the IPv6 DNS record types from the left onto the description on the right.
Answer:
Explanation:
https://ns1.com/resources/dns-types-records-servers-and-queries#:~:text=Address%20Mapping%20record%20(A%20Record,a%20hostname%20to%20another%20hostname.
NEW QUESTION # 339
......
200-301 Deluxe Study Guide with Online Test Engine: https://www.2pass4sure.com/CCNA/200-301-actual-exam-braindumps.html
NEW 2023 Certification Sample Questions 200-301 Dumps & Practice Exam: https://drive.google.com/open?id=1mL8VtCx37jr-TPvNIBMi424mloph9Da_