D-NWG-DS-00 Practice Exams and Training Solutions for Certifications
Dumps Free Test Engine Player Verified Answers
NEW QUESTION # 16
Which template is used to collect the security information for a project?
Response:
- A. SONiC
- B. ZTNA
- C. NIST
- D. STIG
Answer: D
NEW QUESTION # 17
Which item can be viewed directly from the Enterprise Project Services project dashboard?
Response:
- A. Switch Configurations
- B. Installation Address
- C. License Entitlement
- D. Design Details
Answer: B
NEW QUESTION # 18
What is a key reason for using templates during the network design documentation process?
Response:
- A. To replace the need for network monitoring tools
- B. To dynamically assign IP addresses
- C. To reduce the time required for documenting repetitive tasks
- D. To automate network configuration
Answer: C
NEW QUESTION # 19
In the documentation process, a __________ template is used to record any issues encountered during the network's operation and their resolution.
Response:
- A. VLAN Assignment
- B. Pre-Deployment
- C. Topology Design
- D. Troubleshooting
Answer: D
NEW QUESTION # 20
Which network planning task is specifically associated with the VxRail SFS platform?
Response:
- A. Integrating storage networks for virtualization platforms
- B. Deploying cloud-based access points
- C. Planning physical cabling for network switches
- D. Designing network segmentation and firewalls
Answer: A
NEW QUESTION # 21
What does a gray background represent in an Enterprise Project Services template form?
Response:
- A. The customer cannot see the information.
- B. No material has been filled into the form.
- C. The template is out of date.
- D. The gray section is a priority section.
Answer: A
NEW QUESTION # 22
What is a critical consideration during storage network planning?
Response:
- A. Installing wireless access points
- B. Assigning VLAN IDs
- C. Calculating environmental and power requirements
- D. Ensuring proper Fibre Channel zoning and redundancy
Answer: D
NEW QUESTION # 23
What is the main focus when planning a network that supports Fibre Channel over Ethernet (FCoE)?
Response:
- A. Consolidating SAN and LAN traffic over the same network
- B. Configuring access control lists (ACLs)
- C. Securing network traffic with firewalls
- D. Implementing VLANs for segmentation
Answer: A
NEW QUESTION # 24
What is the correct order of steps involved in OSPF troubleshooting?
Response:
- A. 1. Check if the devices are in the same area and area type.
- B. 1. Check if the devices are in the same area and area type.
- C. 1. Check if the devices are in the same area and area type.
- D. 1. Check if the devices are in the same area and area type.
Answer: B
NEW QUESTION # 25
Which of the following are common components of a network design template?
Response:
- A. Network topology diagram
- B. Software patching schedule
- C. IP addressing scheme
- D. VLAN configurations
Answer: A,C,D
NEW QUESTION # 26
Which of the following is a common task performed by deployment support during a network installation?
Response:
- A. Performing vulnerability assessments
- B. Monitoring traffic patterns
- C. Designing IP addressing schemes
- D. Troubleshooting hardware and software issues
Answer: D
NEW QUESTION # 27
Which of the following service options would most likely be offered by a networking design professional?
Response:
- A. Database administration
- B. Software development services
- C. Data center consolidation planning
- D. Website design
Answer: C
NEW QUESTION # 28
FCoE allows the convergence of __________ and storage networking protocols over the same physical infrastructure, reducing the need for separate networks.
Response:
- A. WAN
- B. LAN
- C. SAN
- D. IP
Answer: C
NEW QUESTION # 29
Which document is essential for verifying that all network components meet design specifications after installation?
Response:
- A. Security Policy Document
- B. VLAN Assignment Sheet
- C. Pre-Deployment Checklist
- D. Post-Deployment Verification Template
Answer: D
NEW QUESTION # 30
Which lab environment is most commonly used for verifying the correctness of scripts generated by FastScript?
Response:
- A. EPS Tool
- B. Simulation Lab
- C. Real-time Network Lab
- D. CloudIQ
Answer: C
NEW QUESTION # 31
A project design requires documenting FCoE for an MX7000 chassis. What section should be used for defining the FCoE feature enablement on server NIC card?
Response:
- A. SmartFabric
- B. Chassis Sleds
- C. NPAR
- D. Server Profiles
Answer: C
NEW QUESTION # 32
Which tasks are performed during the scoping phase to align the network design with business requirements?
Response:
- A. Implementing network security policies
- B. Installing routers and switches
- C. Identifying project requirements and constraints
- D. Scheduling network monitoring solutions
Answer: C
NEW QUESTION # 33
In which phase of networking design is the EPS tool most useful?
Response:
- A. During the deployment phase when devices are being installed
- B. During the scoping phase when identifying business needs
- C. During the testing phase to verify performance metrics
- D. During the planning phase to estimate environmental and power requirements
Answer: D
NEW QUESTION # 34
......
Q&As with Explanations Verified & Correct Answers: https://www.2pass4sure.com/Dell-Networking/D-NWG-DS-00-actual-exam-braindumps.html
D-NWG-DS-00 Dumps with Free 365 Days Update Fast Exam Updates: https://drive.google.com/open?id=13h81zUx3SLkDigFkGuX81YM7CR1EkLKv