Get 2026 Most Reliable CheckPoint 156-590 Training Materials
The Realest Study Materials 156-590 Dumps
NEW QUESTION # 26
Task: Generate a report of Anti-Bot and AV incidents.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open SmartEvent > Reports.
2- Choose a template like "Threat Prevention Overview."
3- Filter data by blades: Anti-Bot and Anti-Virus.
4- Generate report for last 7 days.
5- Export as PDF or schedule as recurring email.
NEW QUESTION # 27
Task: Monitor if Anti-Bot is detecting lateral movement inside the network.
Answer:
Explanation:
See the Explanation.Explanation:
1- Use simulated internal bot communication in test lab.
2- Logs & Monitor > Filter blade:"Anti-Bot" and internal source/destination IPs.
3- Check behavior pattern logs, not just single IP detection.
4- Review communication timeline and triggered protections.
5- Use this to tune bot detection rules in the profile.
NEW QUESTION # 28
Task: Simulate a file download test and confirm Anti-Virus prevention using the custom profile.
Answer:
Explanation:
See the Explanation.Explanation:
1- Use EICAR test file in a browser.
2- Confirm file is blocked and logs show blade:"Anti-Virus" and action:"Prevented".
3- Confirm the active profile name matches your custom profile.
4- Check logs for file hash and signature info.
5- Document success as part of validation.
NEW QUESTION # 29
Task: Tag custom protections for better search and grouping.
Answer:
Explanation:
See the Explanation.Explanation:
1- Go to IPS Protections > Create New or Edit existing one.
2- Add tags like "custom", "internal", or "web-servers".
3- Save and update the profile with these protections.
4- Use tag filters to easily manage them later.
5- Export protections by tag if needed.
NEW QUESTION # 30
Task: Add user-defined protections to a custom profile.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open Threat Tools > Protections > Create New Protection.
2- Configure parameters (CVE, service, behavior).
3- Assign the new protection to the custom profile.
4- Set action and performance level.
5- Save and install policy.
NEW QUESTION # 31
Task: Enable Threat Prevention blades including IPS on a Security Gateway via SmartConsole.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open SmartConsole > Gateways & Servers.
2- Double-click your Security Gateway.
3- Go to the "General Properties" tab.
4- Check "IPS", "Anti-Bot", and "Anti-Virus".
5- Click OK, publish changes, then install the policy.
NEW QUESTION # 32
Task: Configure Anti-Bot in the Corporate_TP_Strict profile to prevent all high-confidence threats.
Answer:
Explanation:
See the Explanation.Explanation:
1- Edit the Corporate_TP_Strict profile.
2- Navigate to the Anti-Bot tab.
3- Set High Confidence to Prevent.
4- Set Medium Confidence to Detect or Prevent, depending on policy.
5- Save and publish changes.
NEW QUESTION # 33
Task: Use CLI to test the management server connectivity from the Security Gateway.
Answer:
Explanation:
See the Explanation.Explanation:
1- SSH into the Security Gateway.
2- Ping the management server: ping .
3- Check hostname resolution: nslookup .
4- Confirm SIC is established: cp_conf sic state.
5- Check for outbound connectivity on port 18210 (CPD).
NEW QUESTION # 34
Task: Create a custom Threat Prevention profile named Corporate_TP_Strict in SmartConsole.
Answer:
Explanation:
See the Explanation.Explanation:
1- Go to Threat Prevention > Profiles.
2- Click "New Profile", name it Corporate_TP_Strict.
3- In the base profile, select Optimized as a starting point.
4- Enable IPS, Anti-Bot, Anti-Virus, Threat Emulation, and Threat Extraction.
5- Save the profile for later assignment to a policy rule.
NEW QUESTION # 35
Task: Manually trigger an IPS update from SmartConsole.
Answer:
Explanation:
See the Explanation.Explanation:
1- Go to Threat Prevention > Updates.
2- Click "Check Now" under IPS section.
3- Wait for update to complete and view the status log.
4- On the gateway, check $FWDIR/log/ips_update.elg for details.
5- Confirm the update applied with ips stat.
NEW QUESTION # 36
Task: Use CLI to check ThreatCloud status.
Answer:
Explanation:
See the Explanation.Explanation:
1- SSH into Gateway.
2- Run: tecli show cloud status.
3- Look for Status: Connected.
4- Check logs in /opt/CPsuite-R81/fw1/log/te.log.
5- Ensure outbound HTTPS to ThreatCloud servers is allowed.
NEW QUESTION # 37
Task: Add a comment in a Threat Prevention profile to indicate usage purpose.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open the custom profile (e.g., Corporate_TP_Strict).
2- Add a note in the description field: e.g., "Used for internal office users."
3- Save changes.
4- Optionally add version info or change history.
5- Use this for future auditing and documentation.
NEW QUESTION # 38
Task: Create a Threat Prevention rule targeting internal traffic with minimal IPS coverage.
Answer:
Explanation:
See the Explanation.Explanation:
1- Go to Threat Prevention > Policy.
2- Add a rule: Source=Internal Networks, Dest=Internal Networks.
3- Attach a custom profile with minimal protections.
4- Set Action=Accept and Track=Log.
5- Install the policy and test by generating benign internal traffic.
NEW QUESTION # 39
Task: Test Anti-Bot enforcement using a known malicious test domain.
Answer:
Explanation:
See the Explanation.Explanation:
1- Configure DNS to query a known test domain (e.g., simulating botnet activity).
2- Monitor Logs & Monitor for blade:"Anti-Bot".
3- Confirm "Prevented" action.
4- Review domain reputation in log entry.
5- Ensure the profile has high-confidence blocking enabled.
NEW QUESTION # 40
Task: Enable Anti-Bot and Anti-Virus software blades on a Security Gateway.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open SmartConsole > Gateways & Servers.
2- Double-click the relevant Security Gateway.
3- Under the "General Properties" tab, enable "Anti-Bot" and "Anti-Virus."
4- Click OK > Publish the changes.
5- Install the Access Control and Threat Prevention policy.
NEW QUESTION # 41
Task: Assign Anti-Bot and Anti-Virus profiles to a Threat Prevention policy rule.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open Threat Prevention > Policy.
2- Add a rule with appropriate Source, Destination, Services.
3- Under "Profile," assign the custom AV/AB profile.
4- Set Action to "Accept" and Track to "Log."
5- Publish and install the policy.
NEW QUESTION # 42
Task: Update Anti-Bot and Anti-Virus signatures manually.
Answer:
Explanation:
See the Explanation.Explanation:
1- SSH into the Gateway.
2- Run: avsu_client to trigger the signature update.
3- Monitor: /opt/CPsuite-R81/fw1/log/antivirus_update.elg.
4- On SmartConsole, go to Gateways > Threat Prevention tab to verify update timestamp.
5- Confirm new signatures are downloaded and applied.
NEW QUESTION # 43
Task: Configure a policy to log only "Detect" events for Anti-Bot scanning on internal users.
Answer:
Explanation:
See the Explanation.Explanation:
1- Go to Threat Prevention > Policy.
2- Add a rule: Source = Internal Networks, Dest = Internet.
3- Assign a profile where Anti-Bot action is set to "Detect."
4- Track = Log, Action = Accept.
5- Publish and install the policy.
NEW QUESTION # 44
Task: Enable DNS reputation protection under Anti-Bot in a custom profile.
Answer:
Explanation:
See the Explanation.Explanation:
1- Edit your custom Threat Prevention profile.
2- Under the Anti-Bot section, enable DNS Reputation.
3- Set to Prevent on High Confidence queries.
4- Ensure "Inspect DNS traffic" is enabled.
5- Save and apply the profile.
NEW QUESTION # 45
Task: Modify Anti-Bot to monitor C&C traffic only without blocking it.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open the custom profile in SmartConsole.
2- Under Anti-Bot, change all threat confidence levels to Detect.
3- Disable "Prevent" settings temporarily for testing.
4- Save the profile and apply to a staging policy rule.
5- Verify logs show detections without blocks.
NEW QUESTION # 46
Task: Export current IPS protections list with their actions for audit.
Answer:
Explanation:
See the Explanation.Explanation:
1- Go to Threat Tools > IPS Protections.
2- Use filter or leave default.
3- Click "Export > CSV."
4- Choose file name and download location.
5- Open CSV and sort by Action or Performance Impact for analysis.
NEW QUESTION # 47
Task: Simulate a port scan and verify IPS logs.
Answer:
Explanation:
See the Explanation.Explanation:
1- From a test machine, run: nmap .
2- On SmartConsole, go to Logs & Monitor.
3- Filter logs for blade:"IPS" and source IP of test machine.
4- Confirm log action is "Prevented" or "Detected."
5- Open the log to analyze the protection triggered.
NEW QUESTION # 48
Task: View and interpret Threat Prevention event in SmartEvent.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open SmartEvent > Events tab.
2- Filter by Category: Threat Prevention.
3- Open a specific event to see attack vector, target IP, and action.
4- Click "Show Packet Data" to analyze payload.
5- Cross-reference with IPS protections.
NEW QUESTION # 49
Task: Simulate a malicious file download and validate AV detection.
Answer:
Explanation:
See the Explanation.Explanation:
1- In test environment, download EICAR test file.
2- Monitor logs: blade:"Anti-Virus" AND action:"Prevented".
3- Confirm file type, source IP, and destination file path.
4- Check associated protection name.
5- Ensure AV blade action is set to "Prevent."
NEW QUESTION # 50
Task: Clone an existing profile to use for mobile endpoints and modify AV scanning.
Answer:
Explanation:
See the Explanation.Explanation:
1- Go to Threat Prevention > Profiles.
2- Select the base profile (e.g., Optimized), right-click > Clone.
3- Name it Mobile_Profile.
4- Edit Anti-Virus settings to use Detect instead of Prevent for medium threats.
5- Save and assign to mobile VPN policy rule.
NEW QUESTION # 51
......
LATEST 156-590 Exam Practice Material: https://www.2pass4sure.com/CTPS/156-590-actual-exam-braindumps.html
New 156-590 Actual Exam Dumps, CheckPoint Practice Test: https://drive.google.com/open?id=19d08520eMBnXzsUVLtP93iM58AWr_hPw