[Jan 08, 2022] JN0-362 Exam Brain Dumps - Study Notes and Theory
Pass Juniper JN0-362 Test Practice Test Questions Exam Dumps
Certification Details: Juniper Networks Certified Internet Specialist - Service Provider
At the pinnacle of the Juniper Service Provider certification path lies this Juniper Networks Certified Internet Specialist - Service Provider certification. This certificate complements a student’s knowledge of the Juniper Networks technology at the Specialist level. It confirms your capability to manage routing and switching technologies and the relevant skills in configuring platforms alongside troubleshooting. Juniper demands that all candidates aiming for the JNCIS-SP designation must first complete the associate-level Juniper Networks Certified Internet Associate - Junos certificate.
Understanding functional and technical aspects of Protocol-Independent Routing
The following will be discussed in JN0-362 dumps:
- Identify the concepts, operation, or functionality of various protocol-independent routing components
- Static, aggregate, and generated routes
- Martian addresses
- Load balancing
- Filter-based forwarding
- Routing instances, including RIB groups
- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
- Load balancing
- Filter-based forwarding
- Static, aggregate, and generated routes
NEW QUESTION 32
You have a stub OSPF area running in your network. Your supervisor has asked you to build a virtual link across this area to connect new equipment acquired in a recent ISP acquisition.Which statement is correct about this scenario?
- A. Type 5 LSAs would be seen only in the newly attached area.
- B. Type 5 LSAs would be blocked in a stub area.
- C. Type 5 LSAs would carry external information across your transit area to the backbone.
- D. Type 5 LSAs would be converted to type 7 LSAs.
Answer: B
NEW QUESTION 33
Which statement is true when using MVRP on MX Series devices?
- A. MVRP works with MSTP and RSTP, but not VSTP
- B. MVRP works with MSTP and VSTP, but not RSTP
- C. MVRP works with RSTP and VSTP, but not MSTP
- D. MVRP does not work with MSTP, RSTP, and VSTP
Answer: A
NEW QUESTION 34
By default, which three criteria are used by the Junos load-balancing algorithm to determine a traffic flow? (Choose three.)
- A. destination address
- B. source address
- C. destination port
- D. protocol
- E. source port
Answer: A,B,D
NEW QUESTION 35
Router B is an OSPF router connected to both Area 0 and Area 2. Area 2 has been configured as a totally stubby area.Which three LSA types does Router B suppress from Area 2? (Choose Three.)
- A. Summary LSA
- B. Router LSA
- C. Network LSA
- D. ASBR Summary LSA
- E. External LSA
Answer: A,D,E
NEW QUESTION 36
Click the Exhibit button.
Referring to the exhibit, how many milliseconds must pass before the interface ge-0/0/1.0 is considered down?
- A. 900 ms
- B. 2400 ms
- C. 1200 ms
- D. 1600 ms
Answer: C
NEW QUESTION 37
Click the exhibit.
You are asked to enable a new BGP connection on R1, which has an existing IPv4 peering with R2. The new peering with R3 will use IPv6.
Referring to the exhibit, which two steps are required to enable the new IPv6 peering? (Choose two.)
- A. Configure an IPv6 local address under the BGP group.
- B. Configure the rib inet6.0 statement under the BGP group.
- C. Configure an IPv6 address on the appropriate interface.
- D. Configure an IPv6 neighbor address under the BGP group.
Answer: C,D
NEW QUESTION 38
A customer pays for the bandwidth on a per-packet basis. The network administrator wants to constrain costs and prevent Layer 2 loops on a multihomed Layer 2 WAN network.
Which technology would satisfy these requirements?
- A. Multiple Spanning Tree Protocol
- B. Loop protection
- C. MPLS over GRE
- D. Rapid Spanning Tree Protocol
Answer: B
NEW QUESTION 39
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The OSPF neighbor will be declared down if 500 BFD hello packets are missed
- B. The OSPF neighbor will be declared down if BFD hello packets are not received for 1.5 seconds
- C. The OSPF neighbor will be declared down if BFD hello packets are not received for 5 seconds
- D. The OSPF neighbor will be declared down if three BFD hello packets are missed
Answer: B,D
Explanation:
Explanation
NEW QUESTION 40
Click the Exhibit.
Referring to the exhibit, what is the result of applying this policy?
- A. The 172.18.1.1/32 prefix will be redistributed into OSPF as an external route.
- B. The 172.18.1.0/24 prefix will be redistributed into OSPF as an internal route.
- C. The 172.18.1.0/24 prefix will be redistributed into OSPF as an external route.
- D. The 172.18.1.1/32 prefix will be redistributed into OSPF as an internal route.
Answer: C
NEW QUESTION 41
You must configure an MX Series device to receive and forward a mixture of single-tag and dual- tag frames on interface xe-0/0/0.
In this scenario what will accomplish goal?
- A. xe-0/0/0 {vlan-tagging;}
- B. xe-0/0/0 {vlan-vci-tagging;}
- C. xe-0/0/0 {stacked-vlan-tagging;}
- D. xe-0/0/0 {flexible-vlan-tagging;}
Answer: D
NEW QUESTION 42
Click the Exhibit button.
Your co-worker configures the ge-0/0/0 interface with an IPv6 address of 2001:db8:0:9::/64. After committing the configuration, your co-worker executes the command shown in the exhibit.
What is the fe80::206:aff:fe0e:e01/64 address in this scenario?
- A. the multicast address
- B. the link-local address
- C. the loopback address
- D. the statically assigned address
Answer: B
NEW QUESTION 43
What are tree types of interfaces that can be used in an MX Series device when implementing a virtual switch routing instance? (Choose three.)
- A. Trunk interface
- B. GRE tunnel interface
- C. Access interface
- D. Layer 2 logical interface
- E. Logical tunnel interface
Answer: A,C,D
NEW QUESTION 44
Click the Exhibit button.
Referring to the exhibit, why is the route hidden?
- A. The wrong BGP address family is enabled for the BGP session
- B. The route has yet to be verified
- C. The protocol next hop is not reachable
- D. The MPLS LSP to the 192.168.0.2 peer is down
Answer: C
NEW QUESTION 45
Which two statements describe advantages of using BGP for VPLS signaling instead of LDP signaling? (Choose two.)
- A. There is a separation of signaling from other services.
- B. There is no need for MPLS signaling protocol.
- C. There is a well-defined scaling hierarchy.
- D. There is auto discovery.
Answer: C,D
NEW QUESTION 46
Which two statements are true about VRRP? (Choose two.)
- A. Interfaces within the same VRRP group do not have to be on the same subnet for each member.
- B. VRRP requires redundant REs on each member.
- C. VRRP does not require redundant REs on each member.
- D. Interfaces within the same VRRP group must be on the same subnet for each member.
Answer: C,D
NEW QUESTION 47
What must be configured for all IBGP speakers in an AS to have consistent routing information?
- A. Static routes to the EBGP gateways
- B. Full mesh of IBGP sessions between IBGP speakers
- C. Default routes to the IBGP gateways
- D. Partial mesh of EBGP sessions between EBGP speakers
Answer: B
NEW QUESTION 48
Which two IP addresses are considered Martian addresses? (Choose two.)
- A. 169.254.0.0/16
- B. 240.0.0.0/4
- C. 0.0.0.0/8
- D. 192.168.0.0/8
Answer: B,C
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/recognize-martian-addr- routing.html
NEW QUESTION 49
What is the correct description of an Area Border Router (ABR)?
- A. An ABR is an OSPF router with links in two areas, connecting OSPF areas to the backbone
- B. An ABR is an OSPF router with at least one link in a Layer 2 area
- C. An ABR is an OSPF router with all of its links within an area
- D. An ABR is an OSPF router that injects routing information from outside the OSPF AS
Answer: A
NEW QUESTION 50
Click the exhibit.
Customer 1 has experienced some hardware failures that erroneously transitioned some links into a forwarding state, as shown in the exhibit.
In this scenario, which STP feature set would solve this problem?
- A. Loop protection
- B. Root protection
- C. BPDU protection
- D. MAC movement protection
Answer: A
NEW QUESTION 51
Click the Exhibit button.
Referring to the exhibit, why is the route hidden?
- A. The wrong BGP address family is enabled for the BGP session
- B. The route has yet to be verified
- C. The protocol next hop is not reachable
- D. The MPLS LSP to the 192.168.0.2 peer is down
Answer: C
NEW QUESTION 52
......
The Juniper JNCIS-SP exam, coded JN0-362 qualifies candidates for the Juniper Networks Certified Internet Specialist - Service Provider certification. It assesses the student’s understanding of routing and switching as part of the implementation of the Junos software.
Verified JN0-362 dumps Q&As - JN0-362 dumps with Correct Answers: https://www.2pass4sure.com/JNCIS-SP/JN0-362-actual-exam-braindumps.html