New SAP C-THR84-2405 Dumps & Questions Updated on 2024
Dumps to Pass your C-THR84-2405 Exam with 100% Real Questions and Answers
NEW QUESTION # 24
When configuring Advanced Analytics, which applicant statuses do NOT need to be mapped?Note: There are 2 correct answers to this question.
- A. Forwarded
- B. Invited to Apply
- C. Auto Disqualified
- D. Withdrawn by Candidate
Answer: C,D
Explanation:
When configuring Advanced Analytics, you need to map the applicant statuses from the Recruiting Management module to the corresponding statuses in the Advanced Analytics module. This allows you to track and report on the candidate journey and the effectiveness of your sourcing channels and campaigns. However, some applicant statuses do not need to be mapped, as they are either not relevant or automatically mapped by the system. These statuses are:
Auto Disqualified: This status is assigned to candidates who fail to meet the minimum qualifications or pass the pre-screening questions. This status is automatically mapped to the Disqualified status in Advanced Analytics, and does not need to be manually mapped.
Withdrawn by Candidate: This status is assigned to candidates who withdraw their application voluntarily. This status is not relevant for Advanced Analytics, as it does not reflect the recruiter's actions or decisions. Therefore, it does not need to be mapped.
The other statuses, Invited to Apply and Forwarded, do need to be mapped, as they are important for measuring the candidate experience and the recruiter performance. The Invited to Apply status is assigned to candidates who are invited to apply for a job requisition by the recruiter. This status should be mapped to the Sourced status in Advanced Analytics, to indicate that the candidate was sourced by the recruiter. The Forwarded status is assigned to candidates who are forwarded to another job requisition by the recruiter. This status should be mapped to the Forwarded status in Advanced Analytics, to indicate that the candidate was moved to another opportunity. Reference:
SAP SuccessFactors Recruiting: Candidate Experience 2H/2023
SAP SuccessFactors Recruiting: Candidate Experience Academy
HR832 - SAP SuccessFactors Recruiting: Candidate Experience Administration
NEW QUESTION # 25
Which of the following are leading practices regarding the Source Tracker functionality?Note: There are 3 correct answers to this question.
- A. Adding a tracking link enables reporting in Advanced Analytics for manually posted jobs.
- B. If a source that the customer requests is NOT available to enable in the Site Source Editor, submit a support ticket to request that the source be created.
- C. When setting up the Source Tracker for your customer, always enable all possible sources.
- D. Before a recruiter manually posts a job online, they should generate a tracking link from Recruiting > Source Tracker > Campaign URL Builder.
- E. Enable your customer's Source Tracker options from Command Center.
Answer: A,D,E
Explanation:
The Source Tracker functionality allows you to track the effectiveness of your sourcing channels and campaigns by generating unique tracking links for each job posting. These links can be used to manually post jobs on external sites, such as social media, job boards, or email campaigns. The tracking links capture the source of the candidates who apply through them, and enable reporting in Advanced Analytics for manually posted jobs. You can generate tracking links from Recruiting > Source Tracker > Campaign URL Builder, where you can select the job requisition, the source, and the campaign name. You can also enable your customer's Source Tracker options from Command Center, where you can configure the default source, the source expiration, and the source attribution. You can also edit the sources that are available to select from the Site Source Editor. You should not enable all possible sources, as this may cause confusion and inaccurate data. You should only enable the sources that are relevant and useful for your customer. If a source that the customer requests is not available to enable in the Site Source Editor, you can submit a support ticket to request that the source be created. Reference:
SAP SuccessFactors Recruiting: Candidate Experience 2H/2023
SAP SuccessFactors Recruiting: Candidate Experience Academy
[Reviewing the Candidate Experience in SAP SuccessFactors Recruiting]
NEW QUESTION # 26
You have enabled Candidate Relationship Management and created a branded email layout for your customer.When can this custom email layout be used?Note: There are 2 correct answers to this question.
- A. When sending an email from the Candidate Workbench
- B. When sending an email from the Candidate Search page
- C. When sending an email associated with a Recruiting email trigger
- D. When sending an email associated with an applicant status
Answer: A,B
Explanation:
You can create a branded email layout for your customer to customize the look and feel of your email communications with candidates. You can use the email layout to add your logo, colors, fonts, and other elements that match your brand identity. You can also use the email layout to add dynamic content, such as candidate name, job title, or recruiter name, to personalize your messages. When you have enabled Candidate Relationship Management and created a branded email layout, you can use it in the following scenarios:
When sending an email from the Candidate Workbench: The Candidate Workbench is a tool that allows you to manage your candidates and their activities. You can use the Candidate Workbench to send emails to individual or multiple candidates, and select the email layout that you want to use1.
When sending an email from the Candidate Search page: The Candidate Search page is a tool that allows you to search for candidates based on various criteria, such as keywords, location, skills, or status. You can use the Candidate Search page to send emails to the candidates that match your search results, and select the email layout that you want to use2.
Reference:
SAP SuccessFactors Recruiting: Candidate Experience Administration, Unit 5: Candidate Relationship Management, Lesson: Sending Emails to Candidates, Slide 8 SAP SuccessFactors Recruiting: Candidate Experience Academy, Unit 5: Candidate Relationship Management, Lesson: Sending Emails to Candidates, Slide 9 SAP SuccessFactors Recruiting: Candidate Experience 2H/2023, Topic Areas: Candidate Relationship Management 11% - 20%
NEW QUESTION # 27
You have created a data capture form. What are some options when adding the form to a Landing page?Note: There are 3 correct answers to this question.
- A. You can customize the instructions to complete the form.
- B. You can add or remove fields on the data capture form.
- C. You can configure a specific job alert associated with candidates who submit the form.
- D. You can configure the options when a candidate already has a candidate profile.
- E. You can modify the messages displayed after the candidate submits the form.
Answer: A,C,E
Explanation:
You can create a data capture form to collect information from candidates who visit your career site. You can use the form to build your talent pool, segment your candidates, and send them personalized communications. When you add the form to a Landing page, you have some options to customize the form and its behavior. Some of these options are:
You can configure a specific job alert associated with candidates who submit the form. This allows you to send relevant job notifications to the candidates based on their preferences and qualifications1.
You can customize the instructions to complete the form. This allows you to provide clear and concise guidance to the candidates on how to fill out the form and what information is required2.
You can modify the messages displayed after the candidate submits the form. This allows you to thank the candidates for their interest, confirm their submission, and provide any additional information or next steps3.
Reference:
SAP SuccessFactors Recruiting: Candidate Experience Administration, Unit 5: Candidate Relationship Management, Lesson: Creating Data Capture Forms, Slide 11 SAP SuccessFactors Recruiting: Candidate Experience Academy, Unit 5: Candidate Relationship Management, Lesson: Creating Data Capture Forms, Slide 12 SAP SuccessFactors Recruiting: Candidate Experience 2H/2023, Topic Areas: Candidate Relationship Management 11% - 20%
NEW QUESTION # 28
Implement Advanced Analytics
What are some considerations when defining user permissions for Advanced Analytics? Note: There are 2 correct answers to this question.
- A. Users can be given permissions to view only the high-level report, or can also be provided with the ability to drill to details.
- B. Users must be set up for Recruiter SSO.
- C. Advanced Analytics user permissions are configured in Command Center.
- D. Advanced Analytics user permissions CANNOT be configured until after the Career Site Builder site is live.
Answer: A,C
Explanation:
Option B is correct because Advanced Analytics user permissions are configured in Command Center, which is the administration tool for SAP SuccessFactors Recruiting Marketing. In Command Center, you can assign users to different roles and grant them access to view and use the Advanced Analytics reports1.
Option C is correct because users can be given permissions to view only the high-level report, or can also be provided with the ability to drill to details. The high-level report shows the overall performance of the career site and the sources, while the drill to details feature allows users to see the individual candidate records and actions1.
Option A is incorrect because Advanced Analytics user permissions can be configured before or after the Career Site Builder site is live. However, it is recommended to configure the user permissions before the site is live, so that the users can access the reports as soon as the data is available1.
Option D is incorrect because users do not need to be set up for Recruiter SSO to access Advanced Analytics. Recruiter SSO is a feature that allows recruiters to log in to the Recruiting Management system using their Recruiting Marketing credentials. This feature is optional and does not affect the user permissions for Advanced Analytics2.
Reference:
1: SAP Certified Application Associate - SAP SuccessFactors Recruiting: Candidate Experience 1H/2023 | SAP Training Certification
2: Get certified in SAP SuccessFactors Recruiting: Candidate Experience 1H/2023 | SAP Learning
3: Setting Admin User Permissions | SAP Help Portal
4: Recruiter SSO | SAP Help Portal
NEW QUESTION # 29
Based on leading practices, which of the following page types can contain job listings?
- A. Landing page
- B. Content page
- C. Category page
- D. Home page
Answer: C
Explanation:
Category pages are designed to display job listings based on predefined criteria, such as location, function, or industry. They allow candidates to browse and filter jobs that match their interests and qualifications. Category pages can also include components such as banners, videos, or testimonials to showcase the employer brand and culture.
NEW QUESTION # 30
Which of the following are acceptable configurations that could be added as JavaScript with Career Site Builder?Note: There are 3 correct answers to this question.
- A. Custom third-party cascading style sheets (CSS)
- B. Custom third-party chatbots
- C. Custom third-party survey tools
- D. Custom third-party libraries
- E. Custom third-party analytics for tracking purposes
Answer: B,C,E
Explanation:
Career Site Builder allows you to add custom JavaScript code to your career site for various purposes, such as enhancing the functionality, appearance, or interactivity of your site. However, not all types of JavaScript code are supported or recommended by SAP SuccessFactors. According to the Career Site Builder Implementation Guide, the following types of JavaScript code are acceptable:
Custom third-party survey tools: You can use JavaScript code to embed survey tools from third-party providers, such as SurveyMonkey or Qualtrics, to collect feedback from your site visitors or candidates.
Custom third-party analytics for tracking purposes: You can use JavaScript code to integrate analytics tools from third-party providers, such as Google Analytics or Adobe Analytics, to track and measure the performance of your site, such as traffic, conversions, or bounce rate.
Custom third-party chatbots: You can use JavaScript code to add chatbots from third-party providers, such as Drift or Intercom, to provide live chat support or guidance to your site visitors or candidates.
The following types of JavaScript code are not acceptable:
Custom third-party cascading style sheets (CSS): You cannot use JavaScript code to inject CSS styles from third-party sources, as this may cause conflicts or inconsistencies with the existing styles of your site. You should use the Global Styles feature of Career Site Builder to customize the appearance of your site elements, such as fonts, colors, or layouts.
Custom third-party libraries: You cannot use JavaScript code to load external libraries from third-party sources, such as jQuery or Bootstrap, as this may cause compatibility issues or performance degradation of your site. You should use the built-in components and features of Career Site Builder to create and manage your site content, such as pages, headers, footers, or widgets.
Reference:
Career Site Builder Implementation Guide: This document provides detailed information on how to configure and use Career Site Builder to create and maintain your career site, including how to add custom JavaScript code to your site.
NEW QUESTION # 31
What are some leading practices regarding the timing of the Advanced Analytics implementation?Note: There are 3 correct answers to this question.
- A. Advanced Analytics can be implemented when the applicant status set is created.
- B. The steps to implement Advanced Analytics must be completed over two or more days.
- C. The fields the customer wishes to report on do NOT need to be considered until the Advanced Analytics implementation has begun.
- D. Implement Advanced Analytics immediately following the Career Site Builder site go-live.
- E. Even if Advanced Analytics is configured much later, Advanced Analytics reports contain data beginning when the Career Site Builder career site went live.
Answer: C,D,E
Explanation:
Some leading practices regarding the timing of the Advanced Analytics implementation are:
Even if Advanced Analytics is configured much later, Advanced Analytics reports contain data beginning when the Career Site Builder career site went live. This means that you do not lose any historical data if you delay the Advanced Analytics configuration1.
Implement Advanced Analytics immediately following the Career Site Builder site go-live. This helps you to monitor the performance and effectiveness of your career site and optimize it based on the insights from the reports2.
The fields the customer wishes to report on do NOT need to be considered until the Advanced Analytics implementation has begun. This is because the Advanced Analytics reports are based on the applicant status set, which is already defined in the Recruiting Management module. You do not need to create any custom fields or mappings for the Advanced Analytics reports3.
Reference:
SAP SuccessFactors Recruiting: Candidate Experience Administration, Unit 7: Implement Advanced Analytics, Lesson: Implementing Advanced Analytics, Slide 6 SAP SuccessFactors Recruiting: Candidate Experience Academy, Unit 7: Implement Advanced Analytics, Lesson: Implementing Advanced Analytics, Slide 7 SAP SuccessFactors Recruiting: Candidate Experience 2H/2023, Topic Areas: Implement Advanced Analytics <= 10%
NEW QUESTION # 32
When you test the customer's Career Site Builder (CSB) site with an accessibility checker, two of the footer links display Redundant Title Text alerts.How can you correct this?
- A. Replace the footer link with one that does NOT require a title tag.
- B. The Redundant Title Text issue CANNOT be corrected in the footer of CSB sites.
- C. Rename the link using different text for the Title and Text.
- D. Click the CODE link for suggestions to correct the issue.
Answer: C
Explanation:
In SAP SuccessFactors Recruiting: Candidate Experience, when an accessibility checker identifies Redundant Title Text alerts, it indicates that the title attribute text is identical to the link or alternative text. This redundancy can be corrected by renaming the link using different texts for the Title and Text fields to ensure that they are not identical, enhancing website accessibility. Reference: SAP SuccessFactors Recruiting: Candidate Experience documents available at SAP Training)
NEW QUESTION # 33
What are some of the ways that candidates can be added to a talent pool?Note: There are 3 correct answers to this question.
- A. Add from the Candidate Workbench (Talent Pipeline page).
- B. Auto-populate from a saved search.
- C. Add from a Candidate Search.
- D. Add from an email campaign.
- E. Candidates can add themselves.
Answer: A,B,C
Explanation:
Candidates can be added to a talent pool from the following sources:
Candidate Workbench (Talent Pipeline page): You can manually add candidates to a talent pool from the Talent Pipeline page, which shows all the candidates who have applied to your jobs or have been sourced by you or your team12.
Auto-populate from a saved search: You can create a saved search based on certain criteria and assign it to a talent pool. This will automatically add any candidates who match the criteria to the talent pool13.
Add from a Candidate Search: You can perform a candidate search using keywords, filters, or Boolean operators and add the search results to a talent pool14.
You cannot add candidates to a talent pool from an email campaign or allow candidates to add themselves. Email campaigns are used to communicate with candidates who are already in a talent pool1 . Candidates can only join a talent community, which is a broader group of candidates who have expressed interest in your company, but not a specific job or talent pool1 . Reference: SAP SuccessFactors Recruiting: Candidate Experience Administration, Unit 5: Candidate Relationship Management, Lesson: Talent Pools, pages 5-3 to 5-9.
NEW QUESTION # 34
Job Data Leading Practices
What are some leading practices when creating job descriptions in the requisition?
- A. Include information in the job description such as company information and benefits.
- B. Place the most unique information about the job at the top of the job description.
- C. Do NOT include bullets in job descriptions as they will not display in the career site.
- D. Add an image to the job description to attract more attention.
Answer: A,B
Explanation:
When creating job descriptions in the requisition, it is important to follow some leading practices to ensure that the job descriptions are clear, concise, and compelling. According to the SAP SuccessFactors Recruiting: Candidate Experience Administration course, some of the leading practices are:
Place the most unique information about the job at the top of the job description: This practice helps to capture the attention of the candidates and highlight the main selling points of the job. The most unique information could include the job title, location, summary, or key responsibilities.
Include information in the job description such as company information and benefits: This practice helps to showcase the employer brand and value proposition, and to motivate the candidates to apply for the job. The company information and benefits could include the company culture, vision, mission, values, awards, or recognition.
The following practices are not recommended:
Add an image to the job description to attract more attention: This practice may not be effective, as the image may not display properly on the career site or on external job boards. Moreover, the image may distract the candidates from the actual content of the job description, or may not be relevant to the job.
Do NOT include bullets in job descriptions as they will not display in the career site: This practice is incorrect, as bullets can be used in job descriptions and they will display in the career site. Bullets can help to organize the information in the job description and make it easier to read and scan.
Reference:
SAP SuccessFactors Recruiting: Candidate Experience Administration: This course covers the configuration and administration of the candidate experience features, such as Career Site Builder, Candidate Relationship Management, and Advanced Analytics. It also provides best practices and tips for creating job descriptions in the requisition.
NEW QUESTION # 35
The content of what type of page is most often hosted by a customer externally and linked with their CSB site?
- A. Map page
- B. Landing page
- C. Category page
- D. Content page
Answer: D
Explanation:
A content page is a type of page that displays static or dynamic content, such as text, images, videos, or forms. The content of a content page is most often hosted by a customer externally and linked with their CSB site, because the customer may have existing content management systems or web servers that they want to leverage for their career site. For example, a customer may have an external page that showcases their company culture, values, or benefits, and they may want to link that page with their CSB site to provide a consistent and engaging candidate experience. Reference: SAP SuccessFactors Recruiting: Candidate Experience Administration, Unit 3: Career Site Builder Pages and Components, Lesson: Content Page, Slide 3.
NEW QUESTION # 36
What are some leading practices to distribute jobs for SAP SuccessFactors Recruiting customers?Note: There are 2 correct answers to this question.
- A. Job scrapes
- B. Recruiting Posting
- C. Automated XML feeds
- D. Automated OData feeds
Answer: B,C
Explanation:
Some leading practices to distribute jobs for SAP SuccessFactors Recruiting customers are:
Automated XML feeds: This is a method of sending job data from SAP SuccessFactors Recruiting to external job boards or aggregators in a standardized format. XML feeds can be configured to run on a scheduled basis, and can include filters and parameters to control the data that is sent. XML feeds can improve the accuracy, timeliness, and reach of your job postings, and can also enable tracking and reporting of the source of candidates.
Recruiting Posting: This is a feature of SAP SuccessFactors Recruiting that allows you to post jobs to multiple job boards or aggregators with a single click. Recruiting Posting can be accessed from the Job Requisition page, where you can select the channels, countries, and languages for your job postings. Recruiting Posting can save you time and money, and can also provide analytics and insights on the performance of your job postings.
Automated OData feeds and job scrapes are not leading practices to distribute jobs for SAP SuccessFactors Recruiting customers. OData feeds are used to extract data from SAP SuccessFactors Recruiting for reporting or integration purposes, but they are not designed to send job data to external sites. Job scrapes are methods of extracting job data from your career site by external job boards or aggregators, but they are not reliable, secure, or consistent, and they may not capture all the relevant data or reflect the latest changes. Reference:
SAP SuccessFactors Recruiting: Candidate Experience 2H/2023
SAP SuccessFactors Recruiting: Candidate Experience Academy
HR832 - SAP SuccessFactors Recruiting: Candidate Experience Administration HR840 - SAP SuccessFactors Recruiting: Recruiter Experience Administration
NEW QUESTION # 37
You have enabled Candidate Relationship Management created a branded email layout for your customer. When can this custom email layout be used? Note: There are 2 correct answers to this question.
- A. When sending an email from the Candidate Search page
- B. When sending an email from the Applicant Workbench
- C. When sending an email associated with a Recruiting email trigger
- D. When sending an email associated with an applicant status
Answer: A,B
NEW QUESTION # 38
What are some of the responsibilities of a functional consultant on a Career Site Builder (CSB) implementation?Note: There are 2 correct answers to this question.
- A. Work with the customer to develop a job distribution strategy.
- B. Upsell additional solutions to the customer.
- C. Ensure that the job data supports the customer's recruiting strategy.
- D. Build the customer's CSB site using custom plugins.
Answer: A,C
Explanation:
Based on the web search results, some of the responsibilities of a functional consultant on a CSB implementation are:
Work with the customer to develop a job distribution strategy. This involves understanding the customer's business goals, target audience, and recruitment channels, and helping them to optimize their job postings and campaigns across various platforms, such as job boards, social media, and search engines12.
Ensure that the job data supports the customer's recruiting strategy. This involves analyzing the job requisitions, job descriptions, and job classifications, and ensuring that they are consistent, accurate, and compliant with the customer's requirements and standards. It also involves configuring the CSB site to display the job data in a user-friendly and accessible way, using features such as search filters, job alerts, and job recommendations3 .
Upsell additional solutions to the customer is not a responsibility of a functional consultant on a CSB implementation. This is more likely to be a role of a sales or account manager, who would identify the customer's needs and offer them additional products or services that could enhance their experience or solve their problems.
Build the customer's CSB site using custom plugins is not a responsibility of a functional consultant on a CSB implementation. This is more likely to be a role of a technical consultant or a developer, who would create and implement custom code or plugins to extend the functionality or appearance of the CSB site, according to the customer's specifications or requests.
NEW QUESTION # 39
What should you consider regarding mapping candidate statuses for Advanced Analytics?Note: There are 2 correct answers to this question.
- A. With some exceptions, if a status is NOT mapped when the OData integration is run, the sync will fail.
- B. After saving the status mappings in Command Center, you can correct mapping errors as long as you do it during the same session.
- C. Any status that indicates that the candidate was NOT hired, such as Automatically Disqualified, does NOT need to be mapped.
- D. Status mappings can only be completed when there is candidate data associated with each status on the Talent Pipeline.
Answer: A,B
Explanation:
According to the SAP Help Portal1, you should consider the following regarding mapping candidate statuses for Advanced Analytics:
Any status that indicates that the candidate was NOT hired, such as Automatically Disqualified, does need to be mapped. This is because all statuses must be mapped to one of the five standard statuses in Advanced Analytics: Apply Completed, Qualified, Interviewed, Offer Made, or Hired. If you have multiple not hired statuses, you can map them to ATS Capture, which is a hidden status that does not appear in the reports1.
After saving the status mappings in Command Center, you can correct mapping errors as long as you do it during the same session. This is because the status mappings are not pushed to the Advanced Analytics database until you log out of Command Center or close the browser. If you need to make any changes after logging out, you must contact SAP Customer Support to request a data purge and re-sync1.
With some exceptions, if a status is NOT mapped when the OData integration is run, the sync will fail. This is because the OData integration requires that all statuses are mapped to ensure data consistency and accuracy. The exceptions are when you have a new status that has not been used by any candidates yet, or when you have a status that is not used by any active job requisitions. In these cases, the sync will not fail, but you will receive a warning message and you should map the status as soon as possible1.
Status mappings can be completed even when there is no candidate data associated with each status on the Talent Pipeline. This is because the status mappings are based on the status names and not on the candidate data. You can map any status that exists in your Recruiting Management system, regardless of whether it has been used by any candidates or not1.
NEW QUESTION # 40
What are some options when sending an email campaign?Note: There are 2 correct answers to this question.
- A. An email campaign can be sent multiple times.
- B. Email campaigns can be configured to be sent at a later time.
- C. A test email can be sent.
- D. Up to 5 million candidates can be added to an email campaign.
Answer: A,C
Explanation:
When sending an email campaign, you have the following options:
An email campaign can be sent multiple times. You can use the same email campaign template and content to send to different groups of candidates or at different times. You can also edit the email campaign before sending it again, if needed.
A test email can be sent. You can send a test email to yourself or to a colleague to preview how the email campaign will look and function. This can help you check the formatting, layout, links, and personalization of the email campaign before sending it to the actual candidates. Reference: SAP SuccessFactors Recruiting: Candidate Experience Administration, Unit 2: Candidate Relationship Management, Lesson: Email Campaigns, Slide 10-11.
NEW QUESTION # 41
What happens if a candidate is navigating the Career Site Builder site and clicks to access a branded page that has NOT been built?
- A. An error message will be displayed.
- B. The home page for that brand will display.
- C. A message will display asking the candidate to select a brand.
- D. The page for the default brand will display.
Answer: D
Explanation:
If a candidate tries to access a branded page that has not been built, the system will automatically redirect them to the page for the default brand. This is because the default brand is used as a fallback option when a specific brand is not available or configured. The default brand should have all the pages that are required for the candidate experience, such as the home page, the job search page, the job details page, etc. Reference: SAP SuccessFactors Recruiting: Candidate Experience Administration, Unit 4: Career Site Builder Global Settings and Global Styles, Lesson: Configuring Brands, Slide 9.
NEW QUESTION # 42
Which of the following encrypts personal data used in the recruiting process?
- A. Data Privacy Consent Statement (DPCS)
- B. Secure Socket Layer (SSL)
- C. Data Retention Time Management (DRTM)
- D. Identity Authentication Service (IAS)
Answer: B
Explanation:
Secure Socket Layer (SSL) is a protocol that encrypts personal data used in the recruiting process. SSL ensures that the data transmitted between the candidate's browser and the career site is secure and protected from unauthorized access or tampering1. SSL also helps to improve the candidate's trust and confidence in the career site and the recruiting process2.
Reference:
SAP SuccessFactors Recruiting: Candidate Experience Administration, Unit 2: Site Setup, Lesson: Configuring SSL, Slide 4 SAP SuccessFactors Recruiting: Candidate Experience Academy, Unit 2: Site Setup, Lesson: Configuring SSL, Slide 5 SAP SuccessFactors Recruiting: Candidate Experience 2H/2023, Topic Areas: Site Setup <= 10%
NEW QUESTION # 43
Candidate Relationship Management
Assume that your customer owns a chain of retail stores. They require talent pools based on attributes of the stores, such as Goods Sold, Store Size, and Location.What are the steps to achieve this use case? Note: There are 3 correct answers to this question.
- A. When naming the talent pool, list all of the attributes and their values.
- B. Use the standard filter fields in SAP SuccessFactors HXM Suite to represent the attributes.
- C. Create custom generic objects for Goods Sold and Store Size.
- D. Edit the talent pool and select values for the additional attributes.
- E. Ensure that the location foundation object is enabled and that all required locations have been created.
Answer: C,D,E
Explanation:
To achieve this use case, you need to do the following:
Create custom generic objects for Goods Sold and Store Size in the Metadata Framework (MDF). These objects will store the values for the attributes of the stores. You also need to create associations between these objects and the standard Location Foundation Object.
Ensure that the location foundation object is enabled and that all required locations have been created in the Manage Data tool. You also need to assign values for Goods Sold and Store Size to each location.
Edit the talent pool and select values for the additional attributes. You can use the standard filter fields in SAP SuccessFactors HXM Suite to filter candidates by location, and then use the custom filter fields to filter candidates by Goods Sold and Store Size. You can also name the talent pool according to the attributes and their values.
Reference:
SAP SuccessFactors Recruiting: Candidate Experience Administration, Unit 4: Candidate Relationship Management, Lesson: Talent Pools SAP Certified Application Associate - SAP SuccessFactors Recruiting: Candidate Experience 2H/2023, Topic Area: Candidate Relationship Management 11% - 20%
NEW QUESTION # 44
What are some leading practices to format job requisitions so that the job description will render correctly in the Career Site Builder site?Note: There are 2 correct answers to this question.
- A. Use simple tags such as <li> or <b> in job descriptions.
- B. Use advanced tags such as <div> or <span> in job descriptions.
- C. Use Notepad or another plain text editor to copy and paste job descriptions.
- D. Use Microsoft Word or Excel to copy and paste job descriptions.
Answer: A,C
Explanation:
To format job requisitions so that the job description will render correctly in the Career Site Builder site, you should follow these leading practices:
Use simple tags such as <li> or <b> in job descriptions. These tags are supported by Career Site Builder and can help you create bullet points, bold text, and other basic formatting options. Avoid using advanced tags such as <div> or <span> in job descriptions, as they may cause issues with the layout and styling of the site.
Use Notepad or another plain text editor to copy and paste job descriptions. This will help you avoid any hidden formatting or characters that may come from other sources, such as Microsoft Word or Excel. These sources may introduce unwanted elements or styles that may interfere with the rendering of the job description in the Career Site Builder site. Reference: SAP SuccessFactors Recruiting: Candidate Experience Administration, Unit 5: Job Delivery, Lesson: Job Delivery, Slide 9.
NEW QUESTION # 45
Career Site Design and Accessibility
When internal career site is enabled, what can be different on the Career Site Builder site for internal employees and external candidates?Note: There are 2 correct answers to this question.
- A. Internals and externals may see different headers and footers.
- B. Internals and externals may see different page components.
- C. Internals and externals may be able to apply to different jobs.
- D. Internals and externals may see different job layouts.
Answer: B,C
Explanation:
When internal career site is enabled, you can configure different settings and content for internal employees and external candidates on your Career Site Builder site. This allows you to tailor the candidate experience based on the audience and the business needs. Some of the differences that can be applied are:
Internals and externals may be able to apply to different jobs: You can set up job requisitions to be visible only to internal employees, only to external candidates, or to both. This way, you can control who can view and apply to certain jobs based on their eligibility and suitability. You can also set up different application processes and forms for internals and externals, such as requiring different information or documents, or enabling different integrations or assessments.
Internals and externals may see different page components: You can create different page components for internal employees and external candidates, such as banners, videos, testimonials, or forms. You can also assign different page components to different pages based on the audience, such as showing different messages or images on the home page, category page, or job details page. This way, you can customize the look and feel of your site and provide relevant and engaging content for each group.
Internals and externals may see different headers and footers: This is not a correct answer, because the header and footer settings are global and apply to the entire site, regardless of the audience. You cannot create or assign different headers and footers for internal employees and external candidates. However, you can use the header and footer components to display different links or menus based on the audience, such as showing different career site pages, external sites, or internal resources.
Internals and externals may see different job layouts: This is not a correct answer, because the job layout settings are also global and apply to the entire site, regardless of the audience. You cannot create or assign different job layouts for internal employees and external candidates. However, you can use the job layout components to display different information or actions based on the audience, such as showing different job details, apply buttons, or share options. Reference
NEW QUESTION # 46
What results can you expect if the sitewide metadata is set up as shown below in Career Site Builder (CSB)?
Note: There are 2 correct answers to this question.
- A. Assuming that metadata leading practices have been followed, when a user opens a Category page on the site, Jobs at Best Run will display on the browser tab.
- B. Populating the Meta Keywords field is much more important that using keywords in the page content.
- C. When Jobs at Best Run is returned in search engine results, it will display as a link to the CSB site.
- D. When a user opens the home page for the site, Jobs at Best Run will display on the browser tab.
Answer: C,D
Explanation:
The sitewide metadata in Career Site Builder (CSB) is crucial for enhancing the visibility and accessibility of the site on search engines and for users. If "Jobs at Best Run" is set as the Page Title, it will display on the browser tab when a user opens the home page for the site (Option A). Additionally, when "Jobs at Best Run" appears in search engine results, it will serve as a clickable link directing users to the CSB site (Option B). Option C is incorrect because using keywords in page content is equally important as populating the Meta Keywords field for SEO. Option D is incorrect because metadata leading practices involve specific titles for different pages to enhance SEO. Reference: [SAP SuccessFactors Recruiting: Candidate Experience Administration], Unit 6: Site Setup, Lesson: Site Metadata, Slide 4-5.
NEW QUESTION # 47
What are the options for enabling the "Hear more about career opportunities" flag (also called "Consent to Marketing") so that a candidate receives email campaigns?Note: There are 3 correct answers to this question.
- A. A back-end script is run to update all candidates' settings for "Hear more about career opportunities".
- B. The candidate selects "Hear more about career opportunities" when creating an account.
- C. An Initial Consent email campaign is sent, and if the candidate clicks the opt-in link, the "Hear more about career opportunities" option is enabled.
- D. The candidate updates the setting for "Hear more about career opportunities" from their candidate profile.
- E. A recruiter updates the setting for "Hear more about career opportunities" from the candidate's profile.
Answer: B,C,D
Explanation:
The "Hear more about career opportunities" flag (also called "Consent to Marketing") is a setting that allows candidates to opt-in or opt-out of receiving email campaigns from the customer. Email campaigns are a way of engaging with candidates and informing them about relevant job opportunities, events, or news. The options for enabling the "Hear more about career opportunities" flag are:
The candidate updates the setting for "Hear more about career opportunities" from their candidate profile. This option allows candidates to change their preference at any time from their profile page on the Career Site Builder (CSB) site. They can also view and manage their email subscriptions from the same page.
The candidate selects "Hear more about career opportunities" when creating an account. This option allows candidates to opt-in to receive email campaigns when they register for an account on the CSB site. They can also choose which types of email campaigns they want to receive, such as job alerts, newsletters, or events.
An Initial Consent email campaign is sent, and if the candidate clicks the opt-in link, the "Hear more about career opportunities" option is enabled. This option allows customers to send a one-time email campaign to candidates who have not opted-in or opted-out of receiving email campaigns. The email campaign contains a link that allows candidates to opt-in to receive future email campaigns. This option is useful for customers who have migrated their candidate data from another system and want to obtain consent from existing candidates.
Reference:
SAP SuccessFactors Recruiting: Candidate Experience Administration, Unit 4: Candidate Relationship Management, Lesson: Email Campaigns SAP Certified Application Associate - SAP SuccessFactors Recruiting: Candidate Experience 2H/2023, Topic Area: Candidate Relationship Management 11% - 20%
NEW QUESTION # 48
......
Updated Exam C-THR84-2405 Dumps with New Questions: https://www.2pass4sure.com/SAP-Certified-Associate/C-THR84-2405-actual-exam-braindumps.html
Today Updated C-THR84-2405 Exam Dumps Actual Questions: https://drive.google.com/open?id=1gPPr0312SEkOGaqUAByPsg14u3MT6mcC