[Nov-2021] Latest Network Appliance NS0-183 exam dumps and online Test Engine
Network Appliance NS0-183: Selling NetApp NCSIE ONTAP Products and Solutions
NetApp NS0-183 Exam Certification Details:
| Exam Price | $150 USD |
| Exam Name | Storage Installation Engineer ONTAP |
| Passing Score | 67% |
| Duration | 90 minutes |
| Exam Code | NS0-183 NCSIE |
| Recommended Training | ONTAP Clustered Installation Workshop (ILT) ONTAP Cluster Administration (vILT/ILT) Universal FAS Installation (WBT) Introduction to NetApp Installation Standard (WBT) |
| Number of Questions | 60 |
| Exam Registration | PEARSON VUE |
| Sample Questions | NetApp NS0-183 Sample Questions |
Network Appliance NS0-183 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 81
You installed a new pair of Cisco 92300YC cluster switches at a customer's site. Before you install any files on the switch, you want to view the current configuration.
In this scenario, which command would you use to accomplish this task?
- A. config show
- B. fabricshow
- C. show running-config
- D. switchcfgshow
Answer: D
NEW QUESTION 82
You are creating a new aggregate with one RAID-TEC RAID group.
How many parity drives are used in this scenario?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 83
You configured AutoSupport and are trying to send a full AutoSupport message to NetApp.
You use the autosupport history showcommand and see the output shown in the exhibit.
The customer confirms that the AutoSupport settings are correct.
Which two actions will solve this issue? (Choose two.)
- A. The customer needs to enable AutoSupport for both nodes.
- B. The customer needs to change the transport protocol to HTTP.
- C. The customer needs to white-list the two nodes on their mail server.
- D. The customer needs to exclude the two nodes from the attachment-size limitation.
Answer: A,C
NEW QUESTION 84
When you install a new ONTAP 9.7 4-node cluster, which network type is required?
- A. cluster interconnect
- B. peering network
- C. data network
- D. intercluster network
Answer: A
Explanation:
Explanation/Reference: https://docs.netapp.com/ontap-9/topic/com.netapp.doc.dot-cm-nmg/Network%20and%20LIF%
20management.pdf
NEW QUESTION 85
You are asked to add a new HA pair to an existing 2-node switchless AFF A220 cluster. You must first convert to a 2-node switched cluster using Broadcom BES-53248 cluster switches.
Which two conditions must be fulfilled before you start the migration? (Choose two.)
- A. The "Enabled Switchless Cluster" option must be manually set to "false".
- B. All cluster LIFs must be in the up state and on their home ports.
- C. All cluster LIFs must have an MTU size of 1500.
- D. The 2-node switchless configuration must be properly set up and functioning.
Answer: B,D
NEW QUESTION 86
After completing the installation of an AFF A800 ONTAP AI cluster, you are asked which contacts are available for additional help in obtaining immediate assistance in solving P1 issues.
In this scenario, what do you tell the customer?
- A. Use Guided Problem Solving.
- B. Contact NetApp Support by telephone.
- C. Use the NetApp KB TV channel.
- D. Contact NetApp Support using chat.
Answer: B
NEW QUESTION 87
You install a 4-node cluster with an AFF A400 HA pair and a FAS8300 HA pair. After setup, you are asked to review the audit logs on each controller from a Web browser.
In this scenario, which method provides access to the logs from a Web browser?
- A. SPI
- B. DNS
- C. ADP
- D. ACP
Answer: A
NEW QUESTION 88
An ONTAP cluster is installed at a secure site. The array has no access to the Internet but is managed 24/7 by onsite engineers. The customer requires that when hardware failures occur, the failures are reported to the NetApp Support team as quickly as possible.
In this scenario, which two tasks should be performed during the project hand-off procedure to satisfy the customer's requirement? (Choose two.)
- A. Educate the onsite engineer about how to manually log support calls.
- B. Ensure that the onsite engineers receive EMS alerts when hardware issues occur.
- C. Educate the onsite engineers about invoking the AutoSupport tool from ONTAP System Manager.
- D. Ensure that Active IQ Config Advisor is installed.
Answer: B,C
NEW QUESTION 89
You are setting up a new AFF A400 that will serve iSCSI LUNs. You will have four iSCSI SVMs that each need to connect to an Internet Storage Name Service (iSNS) for discovery and management purposes.
In this scenario, which network interface is needed for each SVM to register with the name service?
- A. SVM management LIF
- B. intercluster LIF
- C. node management LIF
- D. SVM data LIF
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION 90
You create a LIF called svm_cifs_lif01 on a port that is already in an up state. After you test the storage failover, the LIF does not automatically revert to its home port.
In this scenario, what should you do to solve the problem?
- A. Configure a new failover group.
- B. Configure the LIF with the DHCP option.
- C. Add the port in a broadcast domain.
- D. Configure the LIF with the automatic revert option.
Answer: D
NEW QUESTION 91
A customer wants you to add a new AFF A700 HA pair to an existing 4-node AFF8080 EX cluster. The existing cluster uses NetApp CN1610 switches for the cluster connection and is using the recommended port count.
Which statement is true in this scenario?
- A. You cannot mix different AFF models in the same cluster.
- B. You cannot have more than four nodes with AFF.
- C. The AFF A700 is not supported with NetApp CN1610 switches/
- D. There are not enough ports available on the cluster switch.
Answer: A
NEW QUESTION 92
Click the Exhibit button.
A customer has two Cisco 40GbE data switches. They want to connect the switches to an AFF A400 HA pair.
The switches and the AFF A400 are approximately seven meters apart.
Referring to the exhibit, which two supported actions would allow you to accomplish this task? (Choose two.)
- A. Change the requirement for optical cables.
- B. Install 10 meter NetApp supported copper cables.
- C. Change the requirement for Ethernet cables.
- D. Relocate the switches or the AFF A400 so that the distance is less than five meters.
Answer: B,C
NEW QUESTION 93
What is the default shelf ID for disk shelves with IOM12 modules?
- A. 0
- B. 1
- C. 01
- D. 00
Answer: D
NEW QUESTION 94
You are preparing for the installation of a new 2-node cluster with ONTAP 9.7 using NL-SAS drives. Your customer wants to use the cluster exclusively with FlexGroups.
In this scenario, which two statements are correct? (Choose two.)
- A. A SAN protocol is licensed on both nodes.
- B. A NAS protocol is licensed on both nodes.
- C. All NL-SAS drives are divided evenly across both nodes.
- D. All NL-SAS drives are assigned only to one of the nodes.
Answer: B,C
NEW QUESTION 95
Which statement regarding a node-management LIF is true?
- A. The LIF can be set only on the built-in node-management port - e0M.
- B. The LIF can be set up on a dedicated VLAN in the data network.
- C. The LIF must use two switches for redundancy purposes.
- D. The LIF can be set up on a dedicated VLAN in the cluster network.
Answer: B
NEW QUESTION 96
Which two SVMs are automatically created during the cluster setup? (Choose two.)
- A. system SVM
- B. data SVM
- C. node SVM
- D. admin SVM
Answer: A,D
NEW QUESTION 97
You are planning the deployment of a new 8-node ONTAP 9.5 cluster. To prepare for the installation, you want to create a custom configuration worksheet with all the information that the customer provided. You also want to use the worksheet to generate CLI commands for your installation.
In this scenario, which NetApp tool will help you achieve your goal?
- A. Config Advisor
- B. ConfigBulider
- C. Config Validator
- D. Fusion
Answer: B
NEW QUESTION 98
You just installed two nodes into an existing ONTAP cluster.
When running date on the CLI you notice that the cluster1-03 node is running behind time. You confirmed that you can reach the node management LIF of each node.
Referring to the exhibit, which statement is true?
- A. No NTP server is configured for this node.
- B. The NTP is adjusting in small increments.
- C. The DNS is not configured for this node.
- D. The node-management LIF has to be on e0M for NTP to work.
Answer: C
NEW QUESTION 99
......
New 2021 NS0-183 Test Tutorial (Updated 145 Questions): https://www.2pass4sure.com/NetApp-NCSIE-ONTAP/NS0-183-actual-exam-braindumps.html