300-715 Practice Test Questions Updated 153 Questions
Cisco 300-715 Dumps - Secret To Pass in First Attempt
Preparation Process
To get started with exam preparation, the applicants can take the Implementing & Configuring Cisco Identity Services Engine training course. It teaches them the way how to configure and utilize Cisco Identity Services Engine v2.4. It also focuses on the access and identity control policy platform, which simplifies the conveyance of consistent, highly secure access control across wireless, wired as well as VPN connections. In addition, this course can help the specialists to improve their knowledge and mastery of implementing and utilizing Cisco ISE (for instance, profiling services, policy enforcement, web authentication as well as guest access services, endpoint agreement services, BYOD, and TACACS+ device management). Furthermore, it can help the students to master their skills in streamlining security policy management as well as contributing to operational effectiveness. After completing this training option, the individuals will get 40 Continuing Education (CE) credits towards recertification.
NEW QUESTION 56
An administrator for a small network is configuring Cisco ISE to provide dynamic network access to users. Management needs Cisco ISE to not automatically trigger a CoA whenever a profile change is detected. Instead, the administrator needs to verify the new profile and manually trigger a CoA. What must be configuring in the profiler to accomplish this goal?
- A. Port Bounce
- B. Reauth
- C. Session Query
- D. No CoA
Answer: D
Explanation:
Explanation
https://ciscocustomer.lookbookhq.com/iseguidedjourney/ISE-profiling-policies
NEW QUESTION 57
A network security engineer needs to configure 802.1X port authentication to allow a single host to be authenticated for data and another single host to be authenticated for voice. Which command should the engineer run on the interface to accomplish this goal?
- A. authentication host-mode single-host
- B. authentication host-mode multi-auth
- C. authentication host-mode multi-domain
- D. authentication host-mode multi-host
Answer: C
NEW QUESTION 58
There is a need within an organization for a new policy to be created in Cisco ISE. It must validate that a specific anti-virus application is not only installed, but running on a machine before it is allowed access to the network. Which posture condition should the administrator configure in order for this policy to work?
- A. registry
- B. application
- C. file
- D. service
Answer: B
NEW QUESTION 59
Which port does Cisco ISE use for native supplicant provisioning of a Windows laptop?
- A. TCP 8909
- B. TCP 8905
- C. UDP 1812
- D. TCP 443
Answer: A
NEW QUESTION 60
What are two components of the posture requirement when configuring Cisco ISE posture? (Choose two.)
- A. access policy
- B. remediation actions
- C. conditions
- D. Client Provisioning portal
- E. updates
Answer: B,C
Explanation:
Section: Endpoint Compliance
Explanation/Reference:
NEW QUESTION 61
An engineer is implementing Cisco ISE and needs to configure 802.1X. The port settings are configured for port-based authentication. Which command should be used to complete this configuration?
- A. dot1x pae authenticator
- B. authentication port-control auto
- C. aaa authentication dot1x default group radius
- D. dot1x system-auth-control
Answer: C
NEW QUESTION 62
An engineer is using Cisco ISE and configuring guest services to allow wireless devices to access the network.
Which action should accomplish this task?
- A. Create the redirect ACL on the WLC and add it to the WLC policy
- B. Create the redirect ACL on Cisco ISE and add it to the WLC policy
- C. Create the redirect ACL on Cisco ISE and add it to the Cisco ISE Policy
- D. Create the redirect ACL on the WLC and add it to the Cisco ISE policy.
Answer: D
NEW QUESTION 63
Refer to the exhibit.
An organization recently implemented network device administration using Cisco ISE. Upon testing the ability to access all of the required devices, a user in the Cisco ISE group IT Admins is attempting to login to a device in their organization's finance department but is unable to. What is the problem?
- A. The authorization conditions wrongly allow IT Admins group no access to finance devices.
- B. The finance location is not a condition in the policy set.
- C. The authorization policy doesn't correctly grant them access to the finance devices.
- D. The IT training rule is taking precedence over the IT Admins rule.
Answer: B
NEW QUESTION 64
What occurs when a Cisco ISE distributed deployment has two nodes and the secondary node is deregistered?
- A. The secondary node restarts.
- B. Both nodes restart.
- C. The primary node restarts
- D. The primary node becomes standalone
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/1-1-1/installation_guide/ise_install_guide/ise_deploy.html if your deployment has two nodes and you deregister the secondary node, both nodes in this primary-secondary pair are restarted. (The former primary and secondary nodes become standalone.)
NEW QUESTION 65
What is the minimum certainty factor when creating a profiler policy?
- A. the maximum number that a predefined condition provides
- B. the minimum number that a device certainty factor must reach to become a member of the profile
- C. the minimum number that a predefined condition provides
- D. the maximum number that a device certainty factor must reach to become a member of the profile
Answer: B
NEW QUESTION 66
An engineer is using the low-impact mode for a phased deployment of Cisco ISE and is trying to connect to the network prior to authentication. Which access will be denied in this?
- A. EAP
- B. DNS
- C. DHCP
- D. HTTP
Answer: D
NEW QUESTION 67
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide Step 1 Choose Administration > System > Deployment.
The Register button will be disabled initially. To enable this button, you must configure a Primary PAN.
Step 2
Check the check box next to the current node, and click Edit.
Step 3
Click Make Primary to configure your Primary PAN.
Step 4
Enter data on the General Settings tab.
Step 5
Click Save to save the node configuration.
NEW QUESTION 68
An engineer is configuring web authentication and needs to allow specific protocols to permit DNS traffic. Which type of access list should be used for this configuration?
- A. standard ACL
- B. extended ACL
- C. reflexive ACL
- D. numbered ACL
Answer: B
NEW QUESTION 69
What does the dot1x system-auth-control command do?
- A. causes a network access switch to track 802.1x sessions
- B. enables 802.1x on a network access device interface
- C. globally enables 802.1x
- D. causes a network access switch not to track 802.1x sessions
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/XE3-8-0E/15-24E/configuration/guide/xe-380-configuration/dot1x.html
NEW QUESTION 70
What is the condition that a Cisco ISE authorization policy cannot match?
- A. posture
- B. company contact
- C. custom
- D. device type
- E. time
Answer: C
NEW QUESTION 71
......
Cisco 300-715 Exam Dumps [2021] Practice Valid Exam Dumps Question: https://www.2pass4sure.com/CCNPSecurity/300-715-actual-exam-braindumps.html
300-715 Dumps - Grab Out For [NEW-2021] Cisco Exam: https://drive.google.com/open?id=16X0u6BZaVwbfv4X4bYjgD1QPmEIUchIm