300-715 Dumps Free Test Engine Player Verified Updated [Jun 17, 2023]
Q&As with Explanations Verified & Correct Answers
NEW QUESTION # 82
A Cisco device has a port configured in multi-authentication mode and is accepting connections only from hosts assigned the SGT of SGT_0422048549 The VLAN trunk link supports a maximum of 8 VLANS What is the reason for these restrictions?
- A. The device is performing mime tagging while acting as a SXP speaker
- B. The device is performing inline tagging without acting as a SXP speaker
- C. The IP subnet addresses are statically mapped to an SGT
- D. The IP subnet addresses are dynamically mapped to an SGT.
Answer: D
NEW QUESTION # 83
In a Cisco ISE split deployment model, which load is split between the nodes?
- A. device admission
- B. network admission
- C. AAA
- D. log collection
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-6/install_guide/b_ise_InstallationGuide26.pdf
NEW QUESTION # 84
Drag the Cisco ISE node types from the left onto the appropriate purposes on the right.
Answer:
Explanation:
Explanation
Monitoring = provides advanced monitoring and troubleshooting tools that you can use to effectively manage your network and resources Policy Service = provides network access, posture, guest access, client provisioning, and profiling services.
This persona evaluates the policies and makes all the decisions.
Administration = manages all system-related configuration and configurations that relate to functionality such as authentication, authorization, auditing, and so on pxGrid = shares context-sensitive information from Cisco ISE to subscribers
https://www.cisco.com/c/en/us/td/docs/security/ise/1-4/admin_guide/b_ise_admin_guide_14/b_ise_admin_guide
NEW QUESTION # 85
Which two methods should a sponsor select to create bulk guest accounts from the sponsor portal? (Choose two.)
- A. Daily
- B. Random
- C. Known
- D. Imported
- E. Monthly
Answer: B,C
Explanation:
Section: Web Auth and Guest Services
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/sponsor_guide/ b_spons_SponsorPortalUserGuide_13/b_spons_SponsorPortalUserGuide_13_chapter_01.html
NEW QUESTION # 86
Which two probes must be enabled for the ARP cache to function in the Cisco ISE profile service so that a user can reliably bind the IP address and MAC addresses of endpoints? (Choose two.)
- A. DHCP
- B. HTTP
- C. NetFlow
- D. SNMP
- E. RADIUS
Answer: A,E
Explanation:
Cisco ISE implements an ARP cache in the profiling service, so that you can reliably map the IP addresses and the MAC addresses of endpoints. For the ARP cache to function, you must enable either the DHCP probe or the RADIUS probe. The DHCP and RADIUS probes carry the IP addresses and the MAC addresses of endpoints in the payload data. The dhcp-requested address attribute in the DHCP probe and the Framed-IP-address attribute in the RADIUS probe carry the IP addresses of endpoints, along with their MAC addresses, which can be mapped and stored in the ARP cache.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_010100.html
NEW QUESTION # 87
An engineer is configuring Cisco ISE and needs to dynamically identify the network endpoints and ensure that endpoint access is protected. Which service should be used to accomplish this task?
- A. Guest access
- B. Profiling
- C. Posture
- D. Client provisioning
Answer: B
NEW QUESTION # 88
Which personas can a Cisco ISE node assume?
- A. administration, policy service, and monitoring
- B. policy service, gatekeeping, and monitonng
- C. administration, policy service, gatekeeping
- D. administration, monitoring, and gatekeeping
Answer: A
Explanation:
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.html The persona or personas of a node determine the services provided by a node. An ISE node can assume any or all of the following personas: Administration, Policy Service, and Monitoring. The menu options that are available through the administrative user interface are dependent on the role and personas that an ISE node assumes. See Cisco ISE Nodes and Available Menu Options for more information.
NEW QUESTION # 89
Which two features are available when the primary admin node is down and the secondary admin node has not been promoted? ()
- A. guest AUP
- B. BYOD
- C. posture
- D. hotspot
- E. new AD user 802 1X authentication
Answer: A,D
NEW QUESTION # 90
An organization is implementing Cisco ISE posture services and must ensure that a host-based firewall is in place on every Windows and Mac computer that attempts to access the network They have multiple vendors' firewall applications for their devices, so the engineers creating the policies are unable to use a specific application check in order to validate the posture for this What should be done to enable this type of posture check?
- A. Use a compound condition to look for the Windows or Mac native firewall applications.
- B. Enable the default application condition to identify the applications installed and validade the firewall app.
- C. Enable the default firewall condition to check for any vendor firewall application.
- D. Use the file registry condition to ensure that the firewal is installed and running appropriately.
Answer: C
Explanation:
https://www.youtube.com/watch?v=6Kj8P8Hn7dY&t=109s&ab_channel=CiscoISE-IdentityServicesEngine
NEW QUESTION # 91
A network administrator is configuring authorization policies on Cisco ISE There is a requirement to use AD group assignments to control access to network resources After a recent power failure and Cisco ISE rebooting itself, the AD group assignments no longer work What is the cause of this issue?
- A. The AD join point is no longer connected.
- B. The network devices ports are shut down.
- C. The certificate checks are not being conducted.
- D. The AD DNS response is slow.
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/ise_active_directory_integration/b_ISE_AD_integration_2x.html#ID612
NEW QUESTION # 92
A network engineer has been tasked with enabling a switch to support standard web authentication for Cisco ISE. This must include the ability to provision for URL redirection on authentication Which two commands must be entered to meet this requirement? (Choose two)
- A. Ip http server
- B. Ip http authentication
- C. Ip http redirection
- D. Ip http secure-authentication
- E. Ip http secure-server
Answer: A,E
Explanation:
https://www.cisco.com/en/US/docs/switches/lan/catalyst3850/software/release/3.2_0_se/multibook/configuration_guide/b_consolidated_config_guide_3850_chapter_0111001.html
NEW QUESTION # 93
A network administrator is setting up wireless guest access and has been unsuccessful in testing client access. The endpoint is able to connect to the SSID but is unable to grant access to the guest network through the guest portal. What must be done to identify the problem?
- A. Use the identity group to validate the authorization rules.
- B. Use traceroute to ensure connectivity.
- C. Use the endpoint ID to execute a session trace.
- D. Use context visibility to verify posture status.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/b_ise_admin_guide_sample_chapter_011001.html#concept_87916A77E8774545B36D0BB422429596
NEW QUESTION # 94
Which term refers to an endpoint agent that tries to join an 802 1X-enabled network?
- A. client
- B. authenticator
- C. EAP server
- D. supplicant
Answer: D
Explanation:
Reference:
https://www.oreilly.com/library/view/cisco-ise-for/9780133103632/ch16.html#:~:text=What%20is%20a%20supplicant%3F,networks%2C%20both%20wired%20and%20wireless.&text=The%20802.1X%20transactions%20are,Identity%20Services%20Engine%20(ISE).
NEW QUESTION # 95 
Refer to the exhibit. In which scenario does this switch configuration apply?
- A. when passing IP phone authentication
- B. when allowing multiple IP phones to be connected
- C. when allowing a hub with multiple clients connected
- D. when preventing users with hypervisor
Answer: C
Explanation:
Explanation
https://www.linkedin.com/pulse/mac-authentication-bypass-priyanka-kumari#:~:text=Multi%2Dauthentication%
NEW QUESTION # 96
Which two responses from the RADIUS server to NAS are valid during the authentication process? (Choose two)
- A. access-request
- B. access-accept
- C. access-reserved
- D. access-challenge
- E. access-response
Answer: B,D
NEW QUESTION # 97
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide Step 1 Choose Administration > System > Deployment.
The Register button will be disabled initially. To enable this button, you must configure a Primary PAN.
Step 2
Check the check box next to the current node, and click Edit.
Step 3
Click Make Primary to configure your Primary PAN.
Step 4
Enter data on the General Settings tab.
Step 5
Click Save to save the node configuration.
NEW QUESTION # 98
An organization wants to improve their BYOD processes to have Cisco ISE issue certificates to the BYOD endpoints. Currently, they have an active certificate authority and do not want to replace it with Cisco ISE. What must be configured within Cisco ISE to accomplish this goal?
- A. Add an OCSP profile and configure the root certificate authority as secondary.
- B. Create a certificate signing request and have the root certificate authority sign it.
- C. Create an SCEP profile to link Cisco ISE with the root certificate authority.
- D. Add the root certificate authority to the trust store and enable it for authentication.
Answer: C
Explanation:
Reference:
Ref:https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine-software/116068-configure-product-00.html
NEW QUESTION # 99
During BYOD flow, from where does a Microsoft Windows PC download the Network Setup Assistant?
- A. Native OTA functionality
- B. Cisco ISE directly
- C. Cisco App Store
- D. Microsoft App Store
Answer: B
NEW QUESTION # 100
An administrator connects an HP printer to a dot1x enable port, but the printer in not accessible Which feature must the administrator enable to access the printer?
- A. MAC authentication bypass
- B. RADIUS authentication
- C. TACACS authentication
- D. change of authorization
Answer: A
NEW QUESTION # 101
What allows an endpoint to obtain a digital certificate from Cisco ISE during a BYOD flow?
- A. Application Visibility and Control
- B. My Devices Portal
- C. Supplicant Provisioning Wizard
- D. Network Access Control
Answer: B
Explanation:
Section: BYOD
NEW QUESTION # 102
Drag the Cisco ISE node types from the left onto the appropriate purposes on the right.
Answer:
Explanation:
NEW QUESTION # 103
Which two roles are taken on by the administration person within a Cisco ISE distributed environment?
(Choose two.)
- A. active
- B. standby
- C. secondary
- D. backup
- E. primary
Answer: C,E
NEW QUESTION # 104
......
The Cisco 300-715 exam is a valuable certification for professionals who work with Cisco ISE solutions. It validates their knowledge and skills in implementing and configuring network access security using Cisco ISE, and can help them advance their careers and improve their organizations' security posture.
Verified 300-715 dumps Q&As Latest 300-715 Download: https://www.2pass4sure.com/CCNPSecurity/300-715-actual-exam-braindumps.html
300-715 Dumps with Free 365 Days Update Fast Exam Updates: https://drive.google.com/open?id=16X0u6BZaVwbfv4X4bYjgD1QPmEIUchIm