Get Ready to Pass the JN0-104 exam with Juniper Latest Practice Exam
Get Prepared for Your JN0-104 Exam With Actual Juniper Study Guide!
Juniper JN0-104 certification exam is an ideal choice for those who are looking to establish their career in networking technology. JN0-104 exam is a gateway to the world of Juniper networking and provides a solid foundation in Junos OS. JN0-104 exam covers a wide range of topics, from networking fundamentals to advanced routing and switching technologies. JN0-104 exam also tests the candidate's knowledge of network security, virtualization, and automation, which are crucial skills required for modern network administrators.
The JN0-104 exam tests the candidate's knowledge of Junos software, including architecture, configuration, and basic operation. JN0-104 exam consists of 65 multiple-choice questions and has a duration of 90 minutes. The passing score for the exam is 65%, and candidates have up to one year to retake the exam if they fail on their first attempt. JN0-104 exam covers a variety of topics, including networking fundamentals, Junos operating system, user interfaces, routing fundamentals, and switching fundamentals.
NEW QUESTION # 81
Which routing instance type is used for filter-based forwarding applications?
- A. forwarding
- B. vpls
- C. layer2-control
- D. vrf
Answer: A
Explanation:
The forwarding routing instance type is used for filter-based forwarding applications, such as policy-based routing and traffic engineering. This type of routing instance is used when the routing table needs to contain more detailed information than what is available in the default routing table. According to the Juniper Networks Technical Certification Program (JNTCP) documents [1], the forwarding routing instance type is used for filter-based forwarding applications.
NEW QUESTION # 82
In the below exhibit containing the output of the show route command, what does the * indicate?
user@host> show route 192.168.0.0/12
inet.0: 10 destinations, 10 routes (9 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
192.168.0.0/12 *[Static/5] 2w4d 12:54:27
> to 192.168.167.254 via fxp0.0
- A. The route is a default route.
- B. The route is both the active and the last active route.
- C. The route was learned using a dynamic routing protocol.
- D. The route is a direct route.
Answer: B
NEW QUESTION # 83
A packet enters a Junos device. No matching destination entry exists in the forwarding table. How will the device respond?
- A. The RE responds to the destination with a source unreachable notification message
- B. The PFE responds to the source with a destination unreachable notification message
- C. The PFE responds to the destination with a source unreachable notification message
- D. The RE responds to the source with a destination unreachable notification message
Answer: C
NEW QUESTION # 84
What does '3' in Junos version 14.2R3.2 represent?
- A. A service build number.
- B. A minor release number.
- C. A major release number.
- D. A single-threaded version of the Junos OS.
Answer: A
NEW QUESTION # 85
You are asked to enable the configuration archival feature on your Junos OS device.
Which two backup scenarios exist? (Choose two.)
- A. When a user performs a commit operation.
- B. When a specific time interval passes.
- C. When a user logs out of the device.
- D. When a user logs in to the device.
Answer: A,B
NEW QUESTION # 86
In the MAC address 00:90:69:9f:ea:46, what represents the Organizationally Unique Identifier (OUI)?
- A. 69:9f:ea:46
- B. 00:90:69:9f
- C. 9f:ea:46
- D. 00:90:69
Answer: D
NEW QUESTION # 87
Which three statements are true about iPv6 link local addresses? (Choose three )
- A. They can be assigned manually or dynamically.
- B. They begin with the prefix lfe80::/64.
- C. They are optional addresses
- D. They provide reachability to the Internet
- E. They are not guaranteed to be unique outside or the network segment
Answer: A,B,E
NEW QUESTION # 88
What is the name of the volume containing the software and files used for the day-to day operation of a device using Junos with upgraded FreeBSD?
- A. /junos
- B. /active
- C. /oam
- D. /var
Answer: A
NEW QUESTION # 89
Which three statements describe OSPF? (Choose three.)
- A. OSPF uses a distance-vector algorithm to calculate routing cost.
- B. OSPF uses areas to incorporate hierarchy and allow for scalability.
- C. OSPF must operate between different autonomous systems.
- D. OSPF is a link-state IGP.
- E. OSPF calculates the best path to each destination.
Answer: B,D,E
NEW QUESTION # 90
What will the request system configuration rescue save command accomplish?
- A. It will restore your system to factory default settings.
- B. It will save a copy of the configuration so that you can go back to it at any time
- C. It will generate support information for JTAC.
- D. It will prevent 2 commit from happening
Answer: B
NEW QUESTION # 91
At which hierarchy would you configure a static MAC address for interface ge-0/0/0?
- A. [edit interfaces ge-0/0/0 unit 0]
- B. [edit interfaces ge-0/0/0 unit 0 family inet]
- C. [edit interfaces ge-0/0/0 unit 0 family inet address 172.25.11.2/24]
- D. [edit interfaces ge-0/0/0]
Answer: D
NEW QUESTION # 92
Which character in the Junos software CLI allows you to filter and manipulate command output?
- A. <
- B. pipe character
- C. >
- D. question mark
Answer: B
NEW QUESTION # 93
You notice that the terms in your firewall filter are not in the correct order.
What would solve this problem?
- A. Use the insert command to reorder the terms within the filter.
- B. Use the count parameter to ensure that the terms are evaluated correctly.
- C. Use the next term action to force an evaluation of the next term.
- D. Use the reject action to change the action of the filter.
Answer: A
NEW QUESTION # 94
What will the command ping 192.168.1.1 size 5 perform?
- A. It sends exactly five ping requests to 192.168.1.1
- B. It sends a continuous ping with packet length of five bytes to 192.168.1.1
- C. It sends five rapid ping requests to 192.168.1.1
- D. It sends a continuous rapid ping with a packet length of five bytes to 192.168.1.1
Answer: B
NEW QUESTION # 95
Click the Exhibit button.
Referring to the exhibit, which command was issued to generate the output?
- A. show chassis hardware
- B. show chassis fpc
- C. show chassis routing-engine
- D. show chassis environment
Answer: A
NEW QUESTION # 96
Which of these commands can be used to return to a previous version of the software?
- A. request system software add
- B. request system software rollback
- C. request system software downgrade
- D. request system software replace
Answer: B
NEW QUESTION # 97
......
Pass Your Next JN0-104 Certification Exam Easily & Hassle Free: https://www.2pass4sure.com/JNCIA-Junos/JN0-104-actual-exam-braindumps.html
Free Juniper JN0-104 Exam Question Practice Exams: https://drive.google.com/open?id=1ipZHKXT-Wc8wJAW6TCEw5k9wrajr-EI0