[Jan 06, 2022] Lesson Brilliant PDF for the NSE6_FWF-6.4 Tests Free Updated Today
Get New 2022 Valid Practice NSE 6 Network Security Specialist NSE6_FWF-6.4 Q&A - Testing Engine
NEW QUESTION 10
Where in the controller interface can you find a wireless client's upstream and downstream link rates?
- A. On the controller CLI, using the diag wireless-controller wlac -d sta command
- B. On the AP CLI, using the cw_diag -d sta command
- C. On the controller CLI, using the WiFi Client monitor
- D. On the AP CLI, using the cw_diag ksta command
Answer: A
NEW QUESTION 11
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user online activity
- B. Provides real-time insight into user purchase activity
- C. Provides real-time insight into user movements
- D. Provides real-time insight into user usage stats
Answer: D
Explanation:
This geographical data analysis provides real-time insights into user behavior.
NEW QUESTION 12
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
- A. DTLS encryption on wireless traffic must be turned off
- B. SQL services must be running
- C. Wireless network security must be set to open
- D. Two wireless APs must be sending data
Answer: D
Explanation:
FortiPresence VM is deployed locally on your site and consists of two virtual machines. All the analytics data collected and computed resides locally on the VMs.
NEW QUESTION 13
Which administrative access method must be enabled on a FortiGate interface to allow APs to connect and function?
- A. FortiTelemetry
- B. HTTPS
- C. Security Fabric
- D. SSH
Answer: C
NEW QUESTION 14
Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)
- A. Predicting the number of guest users visiting on-site
- B. Gathering details about on site visitors
- C. Reporting potential threats by guests on site
- D. Comparing current data with historical records
Answer: A,B
NEW QUESTION 15
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?
- A. Set the wireless controller country setting
- B. Preauthorize APs
- C. Create a custom AP profile
- D. Create wireless LAN specific policies
Answer: C
NEW QUESTION 16
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?
- A. Configure the APs individually by overriding the settings in Managed FortiAPs
- B. Create a new FortiAP profile and change the county code settings on the profile
- C. Clone a suitable FortiAP profile and change the county code settings on the profile
- D. Configure the controller for the correct country code for Germany
Answer: C
NEW QUESTION 17
Six APs are located in a remotely based branch office and are managed by a centrally hosted FortiGate. Multiple wireless users frequently connect and roam between the APs in the remote office.
The network they connect to, is secured with WPA2-PSK. As currently configured, the WAN connection between the branch office and the centrally hosted FortiGate is unreliable.
Which configuration would enable the most reliable wireless connectivity for the remote clients?
- A. Configure a bridge mode wireless network and enable the Local standalone configuration option
- B. Configure a bridge mode wireless network and enable the Local authentication configuration option
- C. Install supported FortiAP and configure a bridge mode wireless network
- D. Configure a tunnel mode wireless network and enable split tunneling to the local network
Answer: D
NEW QUESTION 18
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Project information phase
- B. Site survey phase
- C. Hardware selection phase
- D. Installation phase
Answer: B,D
Explanation:
Reference:
https://www.automation.com/en-us/articles/2015-2/wireless-device-network-planning-and-design
NEW QUESTION 19
Part of the location service registration process is to link FortiAPs in FortiPresence.
Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)
- A. AP Manager
- B. FortiSwitch
- C. FortiGate
- D. FortiAP Cloud
Answer: C,D
Explanation:
FortiGate, FortiCloud wireless access points (send visitor data in the form of station reports directly to FortiPresence)
NEW QUESTION 20
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)
- A. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
- B. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
- C. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
- D. DARRP measurements can be scheduled to occur at specific times.
Answer: B,C
Explanation:
DARRP (Distributed Automatic Radio Resource Provisioning) technology ensures the wireless infrastructure is always optimized to deliver maximum performance. Fortinet APs enabled with this advanced feature continuously monitor the RF environment for interference, noise and signals from neighboring APs, enabling the FortiGate WLAN Controller to determine the optimal RF power levels for each AP on the network. When a new AP is provisioned, DARRP also ensures that it chooses the optimal channel, without administrator intervention.
NEW QUESTION 21
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. WPA2 Enterprise
- B. Open, with radius MAC filtering
- C. WPA2 Personal and radius MAC filtering
- D. WPA3 Enterprise
Answer: A
Explanation:
Best security option is WPA2-AES.
NEW QUESTION 22
......
NSE6_FWF-6.4 Dumps PDF - 100% Passing Guarantee: https://www.2pass4sure.com/NSE-6-Network-Security-Specialist/NSE6_FWF-6.4-actual-exam-braindumps.html
Latest NSE6_FWF-6.4 PDF Dumps & Real Tests Free Updated Today: https://drive.google.com/open?id=1d_ecN1iwz1fwpXno-6iDRBw1JGDI6lXU