[Sep 25, 2021] NSE6_FWF-6.4 Dumps Full Questions - Exam Study Guide
NSE 6 Network Security Specialist Free Certification Exam Material from 2Pass4sure with 30 Questions
NEW QUESTION 18
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)
- A. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
- B. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
- C. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- D. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
Answer: B,D
NEW QUESTION 19
When enabling security fabric on the FortiGate interface to manage FortiAPs, which two types of communication channels are established between FortiGate and FortiAPs? (Choose two.)
- A. Control channels
- B. Security channels
- C. FortLink channels
- D. Data channels
Answer: A,D
Explanation:
The control channel for managing traffic, which is always encrypted by DTLS. l The data channel for carrying client data packets.
NEW QUESTION 20
Part of the location service registration process is to link FortiAPs in FortiPresence.
Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)
- A. AP Manager
- B. FortiAP Cloud
- C. FortiGate
- D. FortiSwitch
Answer: B,C
Explanation:
FortiGate, FortiCloud wireless access points (send visitor data in the form of station reports directly to FortiPresence)
NEW QUESTION 21
Which two statements about background rogue scanning are correct? (Choose two.)
- A. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- B. A dedicated radio configured for background scanning can support the connection of wireless clients
- C. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- D. Background rogue scanning requires DARRP to be enabled on the AP instance
Answer: A,B
Explanation:
To enable rogue AP scanning
NEW QUESTION 22
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
- A. SQL services must be running
- B. DTLS encryption on wireless traffic must be turned off
- C. Wireless network security must be set to open
- D. Two wireless APs must be sending data
Answer: D
Explanation:
FortiPresence VM is deployed locally on your site and consists of two virtual machines. All the analytics data collected and computed resides locally on the VMs.
NEW QUESTION 23
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?
- A. Create a new FortiAP profile and change the county code settings on the profile
- B. Configure the controller for the correct country code for Germany
- C. Configure the APs individually by overriding the settings in Managed FortiAPs
- D. Clone a suitable FortiAP profile and change the county code settings on the profile
Answer: D
NEW QUESTION 24
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)
- A. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
- B. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
- C. DARRP measurements can be scheduled to occur at specific times.
- D. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
Answer: A,D
Explanation:
DARRP (Distributed Automatic Radio Resource Provisioning) technology ensures the wireless infrastructure is always optimized to deliver maximum performance. Fortinet APs enabled with this advanced feature continuously monitor the RF environment for interference, noise and signals from neighboring APs, enabling the FortiGate WLAN Controller to determine the optimal RF power levels for each AP on the network. When a new AP is provisioned, DARRP also ensures that it chooses the optimal channel, without administrator intervention.
NEW QUESTION 25
Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)
- A. A VAP configured to authenticate locally on FortiGate
- B. A VAP configured to authenticate using a radius server
- C. A VAP configured for WPA2 or 3 Enterprise
- D. A VAP configured for captive portal authentication
Answer: B,C
Explanation:
In the SSID choose WPA2-Enterprise authentication.
WSSO is RADIUS-based authentication that passes the user's user group memberships to the FortiGate.
NEW QUESTION 26
Six APs are located in a remotely based branch office and are managed by a centrally hosted FortiGate. Multiple wireless users frequently connect and roam between the APs in the remote office.
The network they connect to, is secured with WPA2-PSK. As currently configured, the WAN connection between the branch office and the centrally hosted FortiGate is unreliable.
Which configuration would enable the most reliable wireless connectivity for the remote clients?
- A. Configure a tunnel mode wireless network and enable split tunneling to the local network
- B. Configure a bridge mode wireless network and enable the Local standalone configuration option
- C. Configure a bridge mode wireless network and enable the Local authentication configuration option
- D. Install supported FortiAP and configure a bridge mode wireless network
Answer: A
NEW QUESTION 27
Which statement is correct about security profiles on FortiAP devices?
- A. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic
- B. Disable DTLS on FortiAP
- C. FortiGate performs inspection the wireless traffic
- D. Only bridge mode SSIDs can apply the security profiles
Answer: D
NEW QUESTION 28
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
- B. Areas with the signal strength weaker than -68 dB are cut out of the map
- C. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
- D. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
Answer: D
NEW QUESTION 29
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- B. Indicates channels that can be used only when Radio Resource Provisioning is enabled
- C. Indicates channels that cannot be used because of regulatory channel restrictions
- D. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
Answer: B
NEW QUESTION 30
......
Dumps Brief Outline Of The NSE6_FWF-6.4 Exam: https://www.2pass4sure.com/NSE-6-Network-Security-Specialist/NSE6_FWF-6.4-actual-exam-braindumps.html
Use Real NSE6_FWF-6.4 - 100% Cover Real Exam Questions: https://drive.google.com/open?id=1d_ecN1iwz1fwpXno-6iDRBw1JGDI6lXU