[Nov 25, 2022] Latest C-IBP-2202 PDF Dumps & Real Tests Free Updated Today
C-IBP-2202 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund
SAP C-IBP-2202 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION 16
What are some of the prerequisites for configuring a planning area that results in a successful consistency check? Note: There are 2 correct Answers to this question.
- A. Configure at most two input key figures on the same planning level in a key figure calculation.
- B. Assign the compound master data type and its component master data types.
- C. Configure at least one calculated key figure for the planning area.
- D. Specify a planning horizon in the planning area for each level of the assigned time profile.
Answer: B,D
NEW QUESTION 17
You are modeling the introduction of a new product using Lifecycle Planning functionality in SAP IBP. What is mandatory to create in your planning area for the setup of reference product(s) to work?
Note: There are 2 correct Answers to this question.
- A. Definition of an attribute representing the product description
- B. Definition of Actual Sales business meaning for one key figure
- C. Planning objects for the new product
- D. Definition of an attribute representing the product ID
Answer: C,D
NEW QUESTION 18
Which of the following checks for master data and key figures does the Check Mode algorithm trigger?
Note: There are 3 correct Answers to this question.
- A. It checks whether the sourcing in the Production Source Item Master Data type exists.
- B. It checks whether the location resource specified in the master data forms a cycle in the supply chain network.
- C. It checks whether the required planning level master data exists for a subset of input key figures.
- D. It checks whether the heuristic detects cycles formed by nodes (such as location products) in the supply chain network.
- E. It checks whether the location products specified in the master data are connected by customer sourcing rules within the supply chain network.
Answer: C,D,E
NEW QUESTION 19
You are working to realign the data due to a recent warehouse closure. What should you be aware of in regards to configuration of realignment steps? Note: There are 2 correct Answers to this question.
- A. The name of the realignment step should be no longer than 20 characters.
- B. The number of steps in realignment run is limited to 255.
- C. The realignment step status must be set to In Review for it to be executed.
- D. If a realignment step fails, subsequent steps are not processed.
Answer: C,D
NEW QUESTION 20
Which of the following are features of the S&OP process templates? Note: There are 2 correct Answers to this question.
- A. The number of steps in a process template is the same for all implementations.
- B. New instances of templates allow for re-use of the same processes again.
- C. Each step depicted in the template can have tasks associated with it.
- D. All process templates are assigned to dashboards.
Answer: C,D
NEW QUESTION 21
You need to create time periods for the time profile in a planning area. What should you be aware of when executing the Create Time Periods application job?
- A. A time profile has to be activated so that the application job can proceed.
- B. This application job cannot be scheduled for immediate start.
- C. This application job can be run for multiple time profiles at once.
- D. The planning area with this time profile must be activated so that the application job can proceed.
Answer: D
NEW QUESTION 22
NO.53 Which calculations can be processed within the pre-processing step in the forecasting model? Note:
There are 2 correct Answers to this question.
- A. Rounding can be executed for the sales history.
- B. Missing Values can be substituted.
- C. Correlations can be evaluated.
- D. Promotion Sales Lift Ups can be deleted.
Answer: B,D
NEW QUESTION 23
Which features apply to quota violations modeled with the optimizer?
- A. Quotas require sourcing ratios to be maintained.
- B. Min and Max Quotas have to be the same as sourcing ratios.
- C. Quota violation cost is maintained as an attribute as a key figure.
- D. Quotas can be modeled for sourcing location, production, and consensus demand.
Answer: A
NEW QUESTION 24
SAP is transitioning IBP customers to the new process of export/import. What are some of the features of this new process?
Note: There are 2 correct Answers to this question.
- A. You can create a collection of items and export it.
- B. You can choose to import only some of the items that were exported.
- C. You can export from a planning area that is on a different release.
- D. You can move a transported item from one collection to another.
Answer: C,D
NEW QUESTION 25
NO.23 You are redesigning planning for supply chain that is facing the issue of variability. What is the best solution for dampening variability via demand classification?
- A. SAP IBP for Demand
- B. SAP IBP for Demand Driven Replenishment
- C. SAP IBP for Sales and Operations Planning
- D. SAP IBP for Inventory
Answer: D
NEW QUESTION 26
Which of the following are features of lag-based snapshots? Note: There are 2 correct Answers to this question.
- A. Lag-based snapshots are created in the Configuration app for a fixed time range.
- B. Target key figures for these snapshots are exposed to the user in planning views.
- C. Target key figures for these snapshots must have lag as a root attribute.
- D. Lag-based snapshots are automatically assigned to a snapshot operator.
Answer: C,D
NEW QUESTION 27
Which of the following are the key features of SAP Supply Chain Control Tower? Note: There are 2 correct Answers to this question.
- A. Ability to create a feasible plan
- B. Ability to create smart alerts
- C. Ability to use task and case management
- D. Ability to balance demand and supply and attain financial targets
Answer: B,C
NEW QUESTION 28
How can you check if key figure is editable or non-editable?
- A. Using the Analytics Advanced app when selecting key figures
- B. Using the Key Figure Calculations app
- C. Using the Web-based Planning app when selecting key figures
- D. Using the Edit View and then the Edit Planning View option
Answer: C
NEW QUESTION 29
Which header name displays are available in the Report Options menu of the SAP IBP Excel interface? Note:
There are 2 correct Answers to this question.
- A. Changed member names that the user had created
- B. Full unique name including the dimension and technical name
- C. Business meaning, as defined in configuration
- D. Caption, as defined in configuration for the default name
Answer: B,C
NEW QUESTION 30
Which of the following stages can be modeled using scenarios from the S&OP planning cycle?
Note: There are 2 correct Answers to this question.
- A. Demand-supply balancing
- B. Demand review
- C. Data input review for inventory
- D. Demand sensing stage
Answer: A,B
NEW QUESTION 31
You want to display and edit data in different units of measure (UOM). Which of the following must you consider before you use UOM?
Note: There are 3 correct Answers to this question.
- A. Units of measure are usually not time-dependent.
- B. Unit of measure is an attribute of a master data type, such as Product.
- C. Conversion to the target unit of measure is handled by functionality of SAP IBP Excel UI
- D. Units of measure are usually not time-independent.
- E. Analytics provide the user with the option to select the target unit of measure.
Answer: A,B,E
NEW QUESTION 32
What are S&OP operator (optimizer) parameters associated with demand fair share?
- A. Number of fair share segments. Additional tiering costs (default). Number of fair share segments late delivery
- B. You want to copy a custom planning area that was built during the SAP IBP implementation to model a separate process.
- C. Number of fair share segments. Maximum days of coverage. Number of fair share segments late delivery
- D. Number of fair share segments. Maximum inventory. Additional tiering costs (default)
- E. Number of fair share segments. Additional tiering costs (default). Target inventory violation cost
Answer: A
NEW QUESTION 33
You are invited to review a problem with a customer's SAP IBP Excel template performance. What areas with the biggest potential performance impact would you focus on?
Note: There are 2 correct Answers to this question.
- A. Complex calculation graphs for key figures
- B. Number of analytics charts displaying key figures' values
- C. Number of local members and complexity of calculations
- D. Excessive IBP formatting in Excel UI
Answer: A,D
NEW QUESTION 34
You are reviewing the master data types for supply planning. Which master data types are compound master data types? Note: There are 2 correct Answers to this question.
- A. LOCATIONFR
- B. SOURCEPRODUCTION
- C. SOURCECUSTOMER
- D. sourcelocation
Answer: C,D
NEW QUESTION 35
What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct Answers to this question.
- A. Rename the charts.
- B. Organize charts.
- C. Display all assigned analytics on a single UI.
- D. Link two analytics charts.
- E. Add process templates.
Answer: B,C,E
NEW QUESTION 36
You have set up infinite S&OP heuristics for unconstrained planning. What must you do to model inputs as constraints?
Note: There are 2 correct Answers to this question.
- A. Model adjusted transport receipts.
- B. Enter transportation lead times.
- C. Set minimum and maximum lot sizes.
- D. Create product substitutions.
Answer: A,B
NEW QUESTION 37
What are the ways to achieve rolling aggregation with SAP IBP?
- A. Using aggregation mode average
- B. Using attribute as a key figure
- C. Using local member
- D. Using key figure calculation
Answer: A
NEW QUESTION 38
What type of key figure requires a planning level to have all attributes as roots?
- A. The special key figure marked as an aggregate key figure
- B. The conversion key figure, such as exchange rate
- C. The time independent key figure, such as FCSTMAPE
- D. The attribute transformation key figure, such as PERIODID1
Answer: A
NEW QUESTION 39
You want to restrict value entries outside of a specified range into a key figure. What setting will you use to achieve that goal?
- A. IBP -> Data Validation in IBP Formatting Sheet tab
- B. By restricting data input in the Key Figure Configuration app
- C. Select Protect Active Worksheet in the About section of SAP IBP tab
- D. IBP -> Lock Selected cells in IBP Formatting Sheet tab
Answer: B
NEW QUESTION 40
......
2022 Valid C-IBP-2202 test answers & SAP Exam PDF: https://www.2pass4sure.com/SAP-Certified-Application-Associate/C-IBP-2202-actual-exam-braindumps.html